User manual

1 WARNING!

Risk of injury from electrical current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of voltage.

• Observe connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection through correct installation by a quali-

fied electrician.

• The appliance must be connected to the electrical supply by a quali-

fied electrician.

1 IMPORTANT!

Risk of injury from electrical current.

Loose and inappropriate plug and socket connections can make the ter-

minal overheat.

• Have the clamping joints correctedly installed by a qualified electri-

cian.

• Use strain relief clamp on cable.

• In the event of single-phase or two-phase connection, the appropri-

ate mains cable of type H05BB-F Tmax 90° (or higher) must be used.

• If this appliance’s mains cable is damaged, it must be replaced by a

special cable (type H05BB-F Tmax 90°; or higher). The latter is availa-

ble from the Customer Care Department.

A device must be provided in the electrical installation which allows the

appliance to be disconnected from the mains at all poles with a contact

opening width of at least 3 mm.

Suitable isolation devices include line protecting cut-outs, fuses (screw

type fuses are to be removed from the holder), earth leakage trips and

contactors.