Operating instructions

Hold the UPS module firmly at the sides when pushing it in.

Your thumbs should make contact with the orientation marks

on the UPS module (see illustration below).

4. Install the slot cover caps: Insert the slot cover caps from

bottom to top over each individual slot. To ensure optimum

cooling of the individual UPS modules, continuous

operation is only permitted with the slot cover caps in

place.

5. Install the LC display: Connect the plug of the LC display

ribbon cable to the communication port on the front of the

communication module. Fix it in place using the screws

provided. Then engage the display in the top rack on the

front of the unit.