IT 325 88-1636 Rev.
Il vostro nuovo apparecchio Ci complimentiamo con voi per il vostro acquisto di un apparecchio AEG Per mettervi in grado di usare il vostro nuovo fornello in modo efficiente e sicuro, vi preghiamo di leggere accuratamente questo libro di istruzioni prima di installare od usare l’apparecchio, e di conservarlo per poterlo consultare in seguito.
Indice Contenuto Pag no. Per l'utente Il vostro nuovo apparecchio ...................................................................... 2 Informazioni di sicurezza ............................................................................ 4 Descrizione del prodotto ............................................................................ 6 Funzionamento ............................................................................................. 7 Indicazione del bruciatore ........................
Informazioni di sicurezza Non usare il fornello a gas se è comunque danneggiato, ma rivolgetevi al vostro Servizio Assistenza Clienti AEG. Questi avvertimenti sono dati per la vostra sicurezza. Accertatevi di averli completamente compresi prima di installare od usare l’apparecchio. La vostra sicurezza è di importanza capitale. Se siete incerti circa il significato di questi avvertimenti, rivolgetevi al Reparto Assistenza Clienti. Non usare mai piatti di plastica o di alluminio sul fornello.
Assistenza Domanda Risposta Non vi è scintilla quando si accende Il Sono Controllare se il collegamento a 230 V è stato inserito. Relè di errore del circuito di terra è stato interrotto. Saltate le valvole. Quando si rilascia la manopola di regolazione la fiamma si spegne? La manopola di regolazione non è stata premuta abba- stanza a lungo o non è stata premuta a fondo. La fiamma brucia irregolarmente? Controllare se il coperchio è stato rimontato correttamente, ad esempio dopo la pulizia.
Descrizione del prodotto Technical data Regolato per metano: G20-20 mbar direttiva EMC (89/336/CEE) incluse le modifiche accordate. Categoria e pressioni Cavo tipo 0,75 mm² HO5 V2V2-F Tipo di gas Immissione aria IT: II2H3+ 240 V 1N + PE Carico nominale max Q na Hs: Bruciatore di dimensione media = 1,9 kW x 1 Bruciatore di dimensione grande = 2,7 kW x 1 Totale = 4,6 kW Bruciatore N La Dropinetta deve essere collegata attraverso un interruttore esterno con distanza fra i contatti di 3 mm min.
Funzionamento Installazione gas Indicazione del bruciatore Secondo le esigenze locali per gli apparecchi di cottura a gas. L'installazione del gas deve essere effettuata solo da personale autorizzato. Circa i tipi di gas, vedi la specifica tecnica. Per ogni manopola vi è un’indicazione che mostra quale bruciatore viene regolato con la manopola relativa. Collegamento gas Bruciatore posteriore Bruciatore anteriore L'alimentazione gas è situata in basso sul retro dell'apparecchio.
Non installare il fornello sopra un cassetto. Anello/coperchio del bruciatore Insieme all’anello del bruciatore l’anello/coperchio del bruciatore forma uno spazio dove avviene la miscela finale di gas ed aria in modo che il gas possa bruciare correttamente. Si prega di osservare: è pertanto molto importante che ciascun anello/coperchio di ogni bruciatore sia piazzato in modo corretto sul bruciatore.
Non è necessario collegare la traversa di rinforzo alla superficie della tavola, perchè è mantenuta a posto da un pezzo di supporto di forma speciale incorporato nelle flange dell’elemento del fornello. Il sensore termico (B) Min. 140 mm Min. 16 mm Installazione sulla superficie di una tavola con sotto un’unità base Aluminium-tape Se il fornello va installato su un’unità base, sotto il fornello deve essere montata una tavola (ad esempio paniforte da 16 mm).
Assensione * Premere la manopola di regolazione del bruciatore in questione. * Mentre si preme la manopola, girarla contemporaneamente a sinistra verso il segnale di fiamma massima, ed il gas comincia a fluire. (Posizione di accensione). * L’elettrodo di accensione emette scintille e se la miscela di gas ed aria è corretta, il bruciatore si accende. Se è impossibile collegare il fornello alla rete elettrica, si può usare un fiammifero.
Pulizia e manutenzione di Il fornello a gas Per ragioni igieniche e di sicurezza, le zone di cottura devono essere mantenute pulite. Grasso, macchie e cibi versati producono fumo quando sono riscaldati e possono anche causare un incendio. Il pannello di comando con le manopole, il supporto dei tegami e i coperchi/anelli del bruciatore devono essere puliti con normali detersivi. Non usare mai qualsiasi tipo di polvere abrasiva. Pannello Evitare che i tegami spandano quando bollono.
Superfici di acciaio inossidabile Effettuare giornalmente la pulizia con uno straccio leggermente umido. Se lo sporco è più accentuato, usare un detersivo liquido. Pulire sempre l’acciaio nella direzione della finitura. Per essere certi che l’acciaio conservi il suo lucido, si raccomanda di usare un lucido per acciaio inossidabile a base normale. Lucidare sempre nella direzione di finitura dell’acciaio (per traverso). Non usare mai paglietta metallica, spugne metalliche od altri detersivi abrasivi.