LIBRO DI ISTRUZIONE E DI INSTALLAZIONE 6560 G-m 1 IT 949600547
Il vostro nuovo apparecchio Ci complimentiamo con voi per il vostro acquisto di un apparecchio AEG Per mettervi in grado di usare il vostro nuovo fornello in modo efficiente e sicuro, vi preghiamo di leggere accuratamente questo libro di istruzioni prima di installare od usare l’apparecchio, e di conservarlo per poterlo consultare in seguito.
Indice Contenuto Pag no. Per l'utente Il vostro nuovo apparecchio ...................................................................... 2 Informazioni di sicurezza ............................................................................ 4 Descrizione del prodotto ............................................................................ 6 Funzionamento ............................................................................................. 7 Indicazione del bruciatore .........................
Informazioni di sicurezza Questi avvertimenti sono dati per la vostra sicurezza. Accertatevi di averli completamente compresi prima di installare od usare l’apparecchio. La vostra sicurezza è di importanza capitale. Se siete incerti circa il significato di questi avvertimenti, rivolgetevi al Reparto Assistenza Clienti. Non usare il fornello a gas se è comunque danneggiato, ma rivolgetevi al vostro Servizio Assistenza Clienti AEG. Non usare mai piatti di plastica o di alluminio sul fornello.
Quando sarà venuto il momento di disfarsi del fornello Rendere il fornello inutilizzabile tagliando via il cavo. Eliminare tutto il materiale di imballo ed i vecchi apparecchi consegnandoli ad un centro di eliminazione autorizzato. L’apertura di immissione dell’aria primaria non deve mai essere bloccata da oggetti di qualsiasi tipo.
Descrizione del prodotto Immissione aria Bruciatore Manopola di controllo 6
Funzionamento Indicazioni del bruciatore Per ogni manopola vi è un’indicazione che mostra quale bruciatore viene regolato con la manopola relativa. Bruciatore anteriore sinistro Bruciatore posteriore sinistro Bruciatore posteriore destro Bruciatore anteriore destro Segnali sul pannello Ogni manopola di regolazione ha un anello che mostra i punti di regolazione: Spento.
Anello/coperchio del bruciatore Insieme all’anello del bruciatore l’anello/coperchio del bruciatore forma uno spazio dove avviene la miscela finale di gas ed aria in modo che il gas possa bruciare correttamente. Si prega di osservare: è pertanto molto importante che ciascun anello/coperchio di ogni bruciatore sia piazzato in modo corretto sul bruciatore. Se l’anello/coperchio è in posizione errata , il bruciatore funziona in modo difettoso, ed il bruciatore può essere danneggiato in breve tempo.
Il sensore termico (B) Il fornello è provvisto di una particolare valvola termica di sicurezza per il gas (termosensore). Se la fiamma scompare (si spegne), nel giro di pochi secondi (max 90 sec.)il termosensore arresta automaticamente il flusso di gas Nota: L’emissione di gas è sempre permessa finchè si preme la manopola. Vedere al procedimento di accensione.
Assensione * Premere la manopola di regolazione del bruciatore in questione. * Mentre si preme la manopola, girarla contemporaneamente a sinistra verso il segnale di fiamma massima, ed il gas comincia a fluire. (Posizione di accensione). * L’elettrodo di accensione emette scintille e se la miscela di gas ed aria è corretta, il bruciatore si accende. Se è impossibile collegare il fornello alla rete elettrica, si può usare un fiammifero.
Pulizia e manutenzione di Per ragioni igieniche e di sicurezza, le zone di cottura devono essere mantenute pulite. Grasso, macchie e cibi versati producono fumo quando sono riscaldati e possono anche causare un incendio. Pannello Smontaggio del pannello Si può smontarlo, e ne viene così agevolata la pulizia della superficie. Che cosa fare: 1. Tenere il pannello come mostrato in figura 2. Sollevare verticalmente il pannello 3.
Superfici di acciaio inossidabile Effettuare giornalmente la pulizia con uno straccio leggermente umido. Se lo sporco è più accentuato, usare un detersivo liquido. Pulire sempre l’acciaio nella direzione della finitura. Per essere certi che l’acciaio conservi il suo lucido, si raccomanda di usare un lucido per acciaio inossidabile a base normale. Lucidare sempre nella direzione di finitura dell’acciaio (per traverso). Non usare mai paglietta metallica, spugne metalliche od altri detersivi abrasivi.
Il cibo che trabocca o fonde deve essere subito rimosso mentre il fornello è ancora caldo, usando un raschietto per le superfici ceramiche. Sono particolarmente dannose le chiazze di plastica fusa, di alluminio o di qualsiasi cibo contenente zucchero, incluso zucchero naturale, poichè esse possono creare “cicatrici” ed erosioni permanenti sulla superficie ceramica. Dopo averle grattate, vanno lucidate accuratamente col liquido di pulizia fornito col fornello.
Pulizia del fornello a gas Il pannello di comando con le manopole / la griglia per le pentole ed i coperchi / gli anelli del fornello vanno tutti puliti con normali detergenti.
Dati tecnici Questo apparecchio a gas ha l’approvazione ed il marchio secondo la direttiva per apparecchi a gas (90/396/CEE), la direttiva per voltaggi bassi (72/23/CEE) e la direttiva EMC (89/336/CEE) incluse le modifiche accordate.
Montaggio Attenzione: Per evitare pericoli questo apparecchio deve essere installato secondo le presenti istruzioni. Il fornello può essere montato in qualsiasi tipo di cucina con una tavola di spessore fra 28 mm e 40 mm. Aria La distanza fra il lato superiore della tavola e la sottostante struttura di legno deve essere di almeno 47 mm. Fissaggio Portare in fuori le staffe in modo che possano essere ruotate sotto la tavola. Stringere le staffe fissandole alla tavola a mezzo di un normale cacciavite.
Non è necessario collegare la traversa di rinforzo alla superficie della tavola, perchè è mantenuta a posto da un pezzo di supporto di forma speciale incorporato nelle flange dell’elemento del fornello. Installazione sulla superficie di una tavola con sotto un’unità base Min. 140 mm Min. 16 mm Se il fornello va installato su un’unità base, sotto il fornello deve essere montata una tavola (ad esempio paniforte da 16 mm). Aluminium-tape Chiudere ermeticamente tutti i collegamenti con nastro di alluminio.
Non installare il fornello sopra un cassetto.
Installazione gas Secondo le esigenze locali per gli apparecchi di cottura a gas. L'installazione del gas deve essere effettuata solo da personale autorizzato. Circa i tipi di gas, vedi la specifica tecnica. Collegamento gas L'alimentazione gas è situata in basso sul retro dell'apparecchio. La presa è provvista di filettatura conica da ½" gas (vedi fig. 1). Se l'apparecchio deve essere collegato ad una bombola gas, è necessario effettuare la conversione usando la serie di modifica da richiedere.
Assistenza Domanda Risposta Non vi è scintilla quando si accende Il Sono Controllare se il collegamento a 230 V è stato inserito. Relè di errore del circuito di terra è stato interrotto. Saltate le valvole. Quando si rilascia la manopola di regolazione la fiamma si spegne? La manopola di regolazione non è stata premuta abba- stanza a lungo o non è stata premuta a fondo. La fiamma brucia irregolarmente? Controllare se il coperchio è stato rimontato correttamente, ad esempio dopo la pulizia.
325 88-1776 Rev.