User Manual

15
3. Touch the triple ring" sensor panel to activate the outer heating ring.
The upper control lamp will illuminate.
4. To switch off the outer heating ring, touch the triple ring" sensor panel,
and the heating ring that is outermost at the time will switch off.
STOP+GO function
When the Stop+Go" sensor panel is actuated all cooking zones that are
switched on are simultaneously switched to the keep warm setting.
The control light for the Stop+Go" sensor panel will illuminate. The keep
warm setting will be indicated in the display with
.
When the Stop+Go" sensor panel is actuated again, the cooking settings
that were previously selected are reset and the control light goes out.
The timer is not stopped by the Stop+Go function.
If an automatic warm up function was selected in the heating up stage
this will be stopped by the Stop+Go function, and the previously selected
cooking setting will be reset by actuating the Stop+Go" sensor panel
again.