Service manual

10 599 519 523 EN
DGS-TDS
21.04.08
2.6.1 No display or error display on the cooking zone display on the cooker
Alarm symptoms Display Possible Alarm Cause Alarm Remedying
Error display "E". "E" if the
display
exists.
Errors in the cooking zone display in
the cooker concern the hob. I.e. the
same error number is displayed as in
the hob display. For error displays,
refer to Chapter 2.3. Error display "E".
When voltage is applied, the
hob display illuminates
briefly.
But: no display at the cooker,
no display at the hob, no
output at the induction zones.
hob control in the cooker
defective.
Additional instructions and tips
concerning cooker problems are to be
found in the Competence Service
Manual Doc. No. xxx.
(9)