User manual

Refer to "Care and
cleaning" chapter.
Clean the appliance before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
4.2 Using the sensor fields
To activate a function touch and hold the
selected symbol on the display for
minimum 1 second .
4.3 Setting the time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few
seconds the display shows the software
version.
After the software version goes off, the
display shows
and "12:00". "12"
flashes.
1. Press or to set the current
hour.
2. Press to confirm. This is necessary
only when you set the time for the
first time. Later the new time will be
saved automatically after 5 seconds.
The display shows
and the set
hour. "00" flashes.
3. Press or to set the current
minutes.
4. Press
to confirm. This is necessary
only when you set the time for the
first time. Later the new time will be
saved automatically after 5 seconds.
The display shows the new time.
Changing the time
You can change the time of day only if
the oven is off.
Press .
The set time and symbol
flash in the
display.
To set a new time, refer to "Setting the
time".
4.4 Retractable knobs
To use the appliance, press the control
knob. The control knob comes out.
4.5 Preheating
Preheat the empty appliance to burn off
the remaining grease.
1. Set the function and the
maximum temperature.
2. Let the appliance operate for 1 hour.
3. Set the function and the
maximum temperature.
4. Let the appliance operate for 15
minutes.
5. Set the function and the
maximum temperature.
6. Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow in the room is sufficient.
5.
HOB - DAILY USE
WARNING!
Refer to Safety chapters.
ENGLISH 9