User manual

1. Set the correct height and area for
the appliance before you attach the
anti-tilt protection.
2. Install the anti-tilt protection 77 mm
down from the top surface of the
appliance and 49 mm from the left
side of the appliance into the circular
hole on the bracket. See the
illustration. Screw it into the solid
material or use applicable
reinforcement (wall).
3. You can find the hole on the left side
at the back of the appliance. See the
illustration. Lift the front of the
appliance (1) and put it in the middle
of the space between the cupboards
(2). If the space between the bench
cupboards is larger than the width of
the appliance, you must adjust the
side measurement to centre the
appliance.
1
2
49 mm
77 mm
14.5 Electrical installation
WARNING!
The manufacturer is not
responsible if you do not
follow the safety precautions
from Safety chapters.
This appliance is supplied without a main
plug or a main cable.
15. ENERGY EFFICIENCY
15.1 Product information for hob according to EU 66/2014
Model identification 69476IU-MN
Type of hob Hob inside Freestanding Cooker
Number of cooking zones 4
Heating technology Induction
Diameter of circular cooking
zones (Ø)
Left front
Left rear
Right front
Right rear
21.0 cm
21.0 cm
21.0 cm
21.0 cm
Energy consumption per
cooking zone (EC electric
cooking)
Left front
Left rear
Right front
Right rear
174.3 Wh/kg
165.3 Wh/kg
171.3 Wh/kg
165.3 Wh/kg
Energy consumption of the hob (EC electric hob) 169.1 Wh/kg
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for
measuring performance.
The energy measurements referring to
the cooking area are identified by the
crosses of the respective cooking zones.
www.aeg.com46