User manual

ManualsBrandsAEG ManualsDomestic Appliances69476IU-MN

9. OVEN - CLOCK FUNCTIONS

9.1 Clock functions table

Clock function Application

TIME OF DAY To show or change the time of day. You can change the

time of day only when the appliance is on.

DURATION To set how long the appliance operates.

END To set when the appliance deactivates.

TIME DELAY To combine DURATION and END function.

SET+GO To start the appliance with necessary settings with only

one touch of the sensor field any time later.

MINUTE MINDER To set a countdown time. This function has no effect on

the operation of the oven. You can set the MINUTE

MINDER at any time and also when the appliance is off.

00:00 COUNT UP TIMER To set the count up, which shows how long the appli-

ance operates. This function has no effect on the opera-

tion of the appliance. It is on immediately when the oven

starts to heat. The COUNT UP TIMER is not activated if

DURATION and END are set.

9.2 COUNT UP TIMER

1. To reset the Count Up Timer, touch

again and again until flashes in

the display.

2. Touch until the display shows

"00:00" and the Count Up Timer

starts to count up again.

9.3 Setting the DURATION

1. Set an oven function and

temperature.

Touch again and again until

starts to flash.

3. Use or to set the minutes for

DURATION time.

4. Touch

or the DURATION time

starts automatically after 5 seconds.

5. Use or to set the hours for

DURATION time.

6. Touch

. The DURATION time

starts automatically after 5 seconds.

When the set time ends, an acoustic

signal sounds for 2 minutes. and time

setting flash in the display. The appliance

deactivates.

7. Touch a sensor field or open the

oven door to stop the acoustic

signal.

8. Turn off the appliance.

9.4 Setting the END

1. Set an oven function and

temperature.

Touch again and again until

starts to flash.

3. Use or to set the END and

or to confirm. First you set the

minutes and then the hours.

When the set time ends, an acoustic

signal sounds for 2 minutes. and the

time setting flash in the display. The

appliance deactivates automatically.

4. Touch a sensor field or open the

oven door to stop the acoustic

signal.