User manual

5. Turn off the appliance.
9.5 Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
1. Set an oven function (or a
programme) and temperature.
2. Set the DURATION.
3. Touch again and again until
flashes in the display.
4. Touch
to set the SET+GO
function.
The display shows and with an
indicator. This indicator shows which
clock function is activated.
5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
9.6 Setting the MINUTE
MINDER
1. Touch .
and "00" flash in the display.
2. Use to switch between options.
First you set the seconds, then the
minutes and the hours.
3. Use
or to set the MINUTE
MINDER and to confirm.
4. Touch or the MINUTE MINDER
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes and 00:00
and flash in the display.
5. Touch a sensor field or open the
oven door to stop the acoustic
signal.
9.7 Setting the Time delay
function
The DURATION and END can be
used at the same time, if the appliance is
to be switched on and off automatically
later. In this case, first set the DURATION
and then the END function (refer
to "Setting the DURATION" and
"Setting the END" ).
When the Time delay
function is activated, the
display shows a static
symbol of the oven function,
with a dot and . The
dot shows which clock
function is on in the Clock /
residual heat display.
10. OVEN - AUTOMATIC PROGRAMMES
WARNING!
Refer to Safety chapters.
10.1 Automatic programmes
Programme number Programme name
1 BRAISED MEAT
2 ROAST PORK
3 ROAST VEAL
4 ROAST LAMB
5 ROAST GAME
6 CHICKEN, WHOLE
7 FILLET OF FISH
ENGLISH 25