User manual

Problem Possible cause Remedy

The display shows an error

code that is not in this table.

There is an electrical fault. Deactivate the appliance

with the house fuse or the

safety switch in the fuse box

and activate it again.

If the display shows the error

code again, contact the Cus-

tomer Care Department.

The appliance is activated

and does not heat up. The

fan does not operate. The

display shows "Demo".

The demo mode is activa-

ted.

Refer to "Using the settings

menu" in "Additional func-

tions" chapter.

13.2 Service data

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre.

The necessary data for the service centre

is on the rating plate. The rating plate is

on the front frame of the appliance

cavity. Do not remove the rating plate

from the appliance cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

14. INSTALLATION

WARNING!

Refer to Safety chapters.

14.1 Technical data

Dimensions

Height 847 - 867 mm

Width 596 mm

Depth 600 mm

14.2 Location of the appliance

You can install your freestanding

appliance with cabinets on one or two

sides and in the corner.

Minimum distances

Dimension mm

A 685