User manual

9. OVEN - CLOCK FUNCTIONS

9.1 Clock functions table

Clock function Application

TIME OF DAY To show or change the time of day. You can change the

time of day only when the oven is on.

DURATION To set how long the oven works.

END To set when the oven turns off.

TIME DELAY To combine DURATION and END function.

SET+GO To turn on the oven with necessary settings with only

one press of the sensor field any time later.

MINUTE MINDER To set a countdown time. This function has no effect on

the operation of the oven. You can set the MINUTE

MINDER at any time and also when the oven is off.

00:00 COUNT UP TIMER To set the count up, which shows how long the oven

works. This function has no effect on the operation of

the oven. It is on immediately when the oven starts to

heat. The COUNT UP TIMER is not turned on if DURA-

TION and END are set.

9.2 COUNT UP TIMER

1. To reset the Count Up Timer press:

again and again until display

shows flashing .

2. Press and hold:

. When the

display shows "00:00" the Count Up

Timer starts to count up again.

9.3 Setting the DURATION

1. Set a heating function and

temperature.

2. Press again and again until

starts to flash.

3. Press or to set the minutes for

DURATION.

4. Press or the DURATION starts

automatically after 5 seconds.

5. Press or to set the hours for

DURATION.

6. Press or the DURATION starts

automatically after 5 seconds.

When the set time ends, the signal

sounds for 2 minutes. The display shows