User manual

disconnect the appliance from power supply. In either

case contact the Authorised Service Centre.

• After use, switch off the hob element by its control

and do not rely on the pan detector.

• WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to

avoid touching heating elements.

• Always use oven gloves to remove or put in

accessories or ovenware.

• Excessive spillage must be removed before the

pyrolytic cleaning. Remove all parts from the oven.

• Before maintenance, cut the power supply.

• Ensure that the appliance is switched off before

replacing the lamp to avoid the possibility of electric

shock.

• If the mains power supply cable is damaged, it must

be replaced by the manufacturer, its Authorised

Service Centre or similarly qualified persons to avoid

an electrical hazard.

• Be careful when you touch the storage drawer. It can

get hot.

• To remove the shelf supports first pull the front of the

shelf support and then the rear end away from the

side walls. Install the shelf supports in the opposite

sequence.

• The means for disconnection must be incorporated in

the fixed wiring in accordance with the wiring rules.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by

the manufacturer of the appliance in the instructions

for use as suitable or hob guards incorporated in the

appliance. The use of inappropriate guards can cause

accidents.

ENGLISH