Operating instructions

8
The Burners
The burner caps and crowns can be removed for cleaning. Wash the burner caps and
crowns using hot soapy water, and remove marks with a mild paste cleaner. A well
moistened soap impregnated steel wool pad can be used with caution, if the marks are
particularly difficult to remove.
After cleaning, be sure to wipe dry with a soft cloth.
Ignition electrode
The electric ignition is obtained through a ceramic "electrode" and a metal electrode (see
figure-page 6 - letter C).
Keep these components well clean, to avoid difficult lighting, and check that the burner
crown holes are not obstructed.