LAVAMAT 7200 ELECTRONIC Washing Machine User Information
Dear customer, Please read this user information carefully. In particular, pay attention to the section ”Safety” on the first pages. Keep this user information in a safe place for later reference. Pass it on to any subsequent owners of the unit. 1 Points which are necessary for your safety or which are important for the unit's functional capability are highlighted by a warning triangle and/or signal words (Warning!, Caution!, Attention!). Always remember. 0 1.
Contents Instructions for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Environment Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Unit Description . . . . . . . . . . . .
Programme charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate Conditioning/ Starching/Impregnating . . . . . . . . . . . . . . . . . . . . Separate rinse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Water Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Permissible Water Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water Inflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instructions for use Instructions for use 1 Safety The safety of AEG electrical appliances conforms to the recognised technical regulations and the legislation covering the safety of appliances. However, as manufacturers, we still regard it as our responsibility to inform you of the following safety information. Before Putting into Operation for the First Time • Refer to the ”Installation and Connection Instructions” later in this user information.
Instructions for use Child Safety • Packaging components (e.g. films, polystyrene) can be hazardous to children. Risk of suffocation! Keep packaging away from children. • Children often cannot recognise the hazards associated with handling electrical appliances. Therefore, ensure the necessary supervision during operation and do not allow children to play with the washing machine – there is a risk that children can get trapped inside.
Instructions for use • Allow the washing solution to cool before carrying out an emergency emptying operation or cleaning the drain pump. • Small animals can chew the power cables and water hoses. Risk of electric shock and danger of water damage! Keep small animals away from the washing machine. 2 Disposal Dispose the packing material! Dispose of your washing machine's packaging correctly. All the packaging materials used are harmless to the environment and can be recycled.
Instructions for use 2 Environment Tips • The pre-wash cycle is not required for averagely dirty washing. This saves washing powder/liquid, water and time (and does not harm the environment). • The washing machine is especially economical when you fully utilise the stated filling quantities. • For small amounts of washing, use only half to two thirds the recommended amount of washing powder/liquid. • Suitable pretreatment enables stains and small amounts of dirt to be removed.
Instructions for use Unit Description Front View Drawer for washing powder and care agent Control panel Rating plate (behind filling door) Filling door Flap in front of drain pump Screw feet (height-adjustable) Drawer for Washing Powder and Care Agent In-wash stain treatment Main detergent (powder) and water-softener if required Pre-wash detergent/ soaking agent or water-softener Liquid care agent (conditioner, finisher, starch) 10
Instructions for use Control panel Spin speed/RINSE HOLD button Programme selector START/PAUSE button Multidisplay Additional programme buttons Progress indicator Programme selector The programme selector is used to choose the most suitable wash setting (for example, water level, type of drum movement, number of rinses, spin speed) forthe type of wash, as well as the temperature of thedetergent solution. OFF (UIT, ARRET) • Switches off the machine at all other positions the machine remains on.
Instructions for use EASY-CARES (KREUKHERSTELLEND, DEFROISSABLE) Main wash, for easy-care textiles (blend fabrics) at 40 °C to 60 °C. Position EASY-IRON (STRIJKVRIJ, SANS REPASSAGE): Main wash at 40 °C for easy-care textiles, which require only lightor no ironing with this setting. DELICATES (FIJNE WAS, LINGE DELICAT) Main wash for delicates, at 30 °C or 40 °C.
Instructions for use Additional Programming Buttons The additional programming buttons adjust the wash cycle according to how soiled the washing is. Additional cycles are necessary only if the washing is excessively soiled. Depending on the cycle chosen, the various functions may be used in combination with each another. PRE WASH (VOORWAS, PRELAV.
Instructions for use Consumption Values The values for selected programs in the following tables were determined under normal conditions. However, there is a helpful orientation aid for domestic operation.
Instructions for use Prepare the Washing Cycle Sort and Prepare the Washing • Sort the washing according to care codes and type (see ”Washing Types and Care Codes”). • Empty pockets. • Remove metal parts (paper clips, safety pins etc.). • To prevent washing damage and washing snags: Close zip fasteners, button closed bed covers and pillow cases, and tie together ribbons, e.g. on aprons. • Use clothing made of double-layer fabric (sleeping bag, anorak etc.).
Instructions for use Washing Types and Care Codes The care codes help you choose the correct washing program. The washing should be sorted according to type and care code. The temperatures stated in the care codes are all maximum values. Cottons ç Textiles made of cotton and linen with this care code are insensitive to mechanical stress and high temperatures. The program COTTONS/LINEN (WITTE/BONTE WAS, BLANC/COULEURS) is suitable for this type of washing.
Instructions for use Washing Detergents and Care Agents Which washing detergent and care agent? Use only washing detergents and care agents which are suitable for use in washing machines. Always follow the manufacturer's instructions.
Instructions for use Performing a wash cycle Quick Start Guide To complete a wash cycle, follow the steps below: 0 1. Open the door, load the washing. 2. Close the door. 3. Pour detergent/conditioner into the drawer. 4. Choose a suitable programme: – use the programme selector to set the programme – set any additional programme functions as required 5. If necessary, adjust the spin speed or select RINSE HOLD (GEEN CENTR., SANS ESSOR.). 6.
Instructions for use Add Washing Detergent/Care Agent Refer to the information on washing detergents and care agents, see section ”Washing Detergents and Care Agents”. 0 1. Open the washing detergent drawer: grip inside the flap on the drawer at the bottom (1) and pull out the drawer as far as it will go (2). 3 2.
Instructions for use Set the Washing Program For a suitable program, the right temperature and possible additional programs for the relevant washing type, refer to the ”Program Tables”. 0 1. Set the program selector to the required washing program with the required temperature. The probable duration of the set program in minutes is shown in the multi-display. 3 2. Select any additional programs: The indicator for the selected additional program lights up.
Instructions for use Change Spin Speed / Select Rinse Hold 0 If necessary, change the spin speed for the final spin / select RINSE HOLD (GEEN CENTR., SANS ESSOR.): Press the button Spin speed/RINSE HOLD (GEEN CENTR., SANS ESSOR.) as often as necessary until the display for the required spin speed (or of RINSE HOLD/GEEN CENTR., SANS ESSOR.) lights up. If RINSE HOLD (GEEN CENTR., SANS ESSOR.) is selected, the washing remains in the last rinsing water and is not spun.
Instructions for use Starting the programme 0 1. Check that the water supply tap is open. 2. Start the program: Press the START/PAUSE (START/PAUZE, MARCHE/PAUSE) button. The programme starts. Programme display Progress indicator Before the programme begins, the steps to be completed are shown on the Progress indicator. The stage of the programme currently running is indicated. Multidisplay The estimated time remaining (in minutes) is shown on the Multidisplay until the programme is completed.
Instructions for use Changing the programme Changing or interrupting 0 1. Press the START/PAUSE (START/PAUZE, MARCHE/PAUSE) button. 2. Turn the programme selector to OFF (UIT, ARRET). The programme is stopped. 3. Set another programme if required. Otherwise, set the selector to PUMP OUT (POMPEN, VIDANGE), SPIN (CENTRIFUG., ESSORAGE) or GENTLE SPIN (KORT CENTRIFUG., ESSOR. DELICAT) and press the START/PAUSE (START/PAUZE, MARCHE/PAUSE) button. (the water is pumped out, or the spin cycle begins.
Instructions for use End of wash cycle/Taking out washing When the programme is completed, the END (EINDE, FIN) light on the progress indicator comes on. If RINSE HOLD (GEEN CENTR., SANS ESSOR.) was selected, the indicator beside the START/PAUSE (START/PAUZE, MARCHE/PAUSE) button flashes. 0 1.
Instructions for use Programme charts Wash All settings that are generally used in every-day operation of the machine (but not all possible settings) are listed here. Type of items to be washed Care label Cottons ç Energy-Saving programme: Cottons ç Linen è ë Max. load size1) (dry weight)2) Programme selector Temperature Additional programmes possible 5kg COTTONS/LINEN (WITTE/BONTE WAS, BLANC/COULEURS) 95 PRE WASH (VOORWAS, PRELAV.
Instructions for use Type of items to be washed Care label Delicates ì Woollens/Handwash 9 ì ï Max. load size1) (dry weight)2) 2,5kg (or 15-20m2 curtains) 2kg Programme selector Temperature DELICATES (FIJNE WAS, LINGE DELICAT) 30, 40 Additional programmes possible PRE WASH (VOORWAS, PRELAV.) SHORT (KORT, COURT) STAIN (VLEKKEN, TACHES)3) P WOOL (WOL, LAINE) COLD (KOUD, FROID) to 40 1) The load amount inquiry operates in accordance with the EN 60456 standard load.
Instructions for use Separate Conditioning/ Starching/Impregnating Type of items to be washed Cottons/Linen Max. load size (dry weight) Programme selector 5kg STARCHING (STIJVEN, AMIDON.) Separate rinse Type of items to be washed Cottons/Linen Max. load size (dry weight) 5kg Easy-Cares 2.5kg Delicates 2.5kg Woollens/Handwash Programme selector GENTLE RINSE (FIJN SPOELEN, RINC. DELICAT) 2kg Separate spin Type of items to be washed Cottons/Linen Max.
Instructions for use Cleaning and Care Control Panel 0 Attention! For cleaning panels and control parts, do not use furniture polish or any aggressive cleaning agents. Wipe off control panels with a damp cloth. Use warm water to do this. Washing Detergent Drawer The washing detergent drawer should be cleaned from time to time. 0 1. Pull out the washing detergent drawer as far as it will go. 2. Remove the washing detergent drawer with a firm pull. 3.
Instructions for use 7. Use a brush to clean the entire rinsing-in part of the washing machine, especially the nozzles on the top side of the rinsing-in chamber. 8. Insert the washing detergent drawer into the guide rails and push it in. Washing Drum 0 The washing drum is made of high-quality stainless steel. Rust deposits on the drum can occur due to foreign bodies in the washing which can cause rust.
Instructions for use What to do if ... Remedying Faults In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even during the warranty period. • If the fault code E10, E20 or E40 is shown in the multidisplay, you may be able to remedy the fault yourself (see Faults Table below).
Instructions for use Fault The water does not flow. Error code E10 appears. The SPIN (CENTRIFUG., ESSORAGE) indicator flashes. Possible Cause Remedy The water supply tap is closed. Open the tap. Start the programme again. The filter in the water inlet hose coupling is clogged. Close the water tap. Unscrew the hose from the water supply tap, take out the filter and rinse it under the kitchen tap The water supply tap is blocked with limescale, or is faulty.
Instructions for use Fault Possible Cause Remedy The water inlet hose coupling Tighten the hose coupling. is loose. The outlet hose is loose. Check the outlet hose and replace if necessary. The detergent solution pump Close the cover properly. cover is not properly closed. Water runs out from under the machine. Clothes are caught in the door. Stop the programme, remove the item from the door. Start the programme again. The emergency drain hose is not properly fastened or is loose.
Instructions for use Fault Washing is not spun sufficiently, excess water is still visible in the drum. Error code E20 appears. The RINSE (SPOELEN, RINCAGE) indicator flashes. Possible Cause Remedy There is a kink in the outlet hose. Straighten the hose. The maximum pump height (outlet hose height 1m from from the support surface of the appliance) has been exceeded. Call Customer Service, who have modification kits available as accessories for pump heights over 1m.
Instructions for use Fault Possible Cause Remedy The programme will continue, when power is restored. Mains power failure while a programme is running (all indicators are off). Leftover detergent builds up in the detergent dispenser drawer. 34 If the washing has to be taken out during the power Power may have been cut off failure: by the electricity supplier. Turn the programme selec(the door remains locked for tor to OFF (UIT, ARRET). around 2 minutes, for safety Carry out an emergency reasons.
Instructions for use If the washing result is not satisfactory If the washing is grey and limescale forms in the drum • Not enough washing detergent added. • The right washing detergent was not used. • Special types of stain were not pretreated. • Program or temperature incorrectly set. • If binary wahing detergents were used, the individual components were not added in the correct ratio.
Instructions for use Drain pump The drain pump is maintainance-free. The cover of the drain pump is required to be opened only in the event of a malfunction when no more water is being pumped out, e.g. if the pump wheel is blocked. Before loading the machine, please always ensure that there are no foreign objects present in the pockets or inbetween the items to be washed. Paper clips, nails etc.
Instructions for use 6. Replace the pump cover. Laterally insert the webs on the cover into the guide slots and securely screw on the cover in a clockwise motion. 7. Close the emergency emptying hose and place it in the holder. 8. Close the flap. Carry Out an Emergency Emptying Operation • When the washing machine no longer pumps off the washing solution, an emergency emptying operation must be carried out.
Instructions for use 4. Place the collecting vessel underneath. 5. Release and pull out the plug of the emergency emptying hose by turning it anticlockwise. The washing solution drains off. Depending on the amount of solution, it may be necessary to empty the collecting vessel several times. To do this, temporarily close the emergency emptying hose again with the plug. When all the washing solution has drained off: 6. Firmly push the plug into the emergency emptying hose and turn it tight clockwise. 7.
Instructions for use Child Safety Feature When the child safety feature is used, the filling door can no longer be closed and no more washing programs can be started. 0 1 0 Setting the Child Safety Feature: Use a coin to turn the rotary knob (on the inside of the filling door) clockwise as far as it will go. Warning! The rotary knob must not be pressed in following adjustment, otherwise the child safety feature is not active. The rotary knob must project as shown in the diagram.
Setting up and connection instructions Setting up and connection instructions Safety Instructions for Installation • Do not tilt the washing machine onto its front or onto its right side (looking from the front). Electrical components could get wet! • Check the washing machine for transport damage. Never connect a damaged unit. Consult your supplier in the event of damage.
Setting up and connection instructions Setting Up the Unit 3 Washing machines with curved panels are not suitable for substructures. Transporting the Unit • Do not place the washing machine on its front side or on its right side (looking from the front). Otherwise the electrical components can get wet. • Never transport the unit without using the transport safeguard. Do not remove the transport safeguard until you reach the installation site.
Setting up and connection instructions 3 42 The special button A and the plug caps B (2 ea.) and C (1 ea.) are supplied with the unit. 3. Remove the screw D, including the compression spring with the special button A. 4. Close off the hole with the plug cap C. Attention! Push in the plug cap so firmly that it engages in the rear panel (this protects the inside of the unit against splash water). 5. Unscrew the two screws E using the special button A. 6.
Setting up and connection instructions Prepare the Installation Location • The installation surface must be clean, dry and free of floor wax residue and other lubricating coatings so that the unit does not slide away. Do not use any lubricants as sliding aids. • It is not recommended to set up the washing machine on deep-pile carpets or on floor coverings with soft foam underlays, as this would mean that the stability of the unit would not be guaranteed.
Setting up and connection instructions Compensate for Floor Unevenness Floor unevenness can be compensated for and the height can be corrected with the four adjustable screw feet. The height can be adjusted in a range of +10 ... -5 mm. To adjust the feet use the special spanner supplied for removing the transport braces. 0 1. Slide the special key firmly onto the hexagon head of the threaded foot as far as it will go. 2. Adjust the screw feet so that the unit is horizontal and stable.
Setting up and connection instructions Electrical Connection Refer to the rating plate for details of the mains voltage, current type and the necessary fuses. The rating plate is located at the top behind the filling door.
Setting up and connection instructions Water Inflow A pressure hose 1.5m in length is supplied. If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections offered by our Customer Service is permissible. – Sets of hoses in lengths of 2.2m, 3.5m and 5m are available for washing machines without Aqua-Control. – Sets of hoses in lengths of 2.0m, 2.9m and 3.9m are available for washing machines with Aqua-Control.
Setting up and connection instructions Water Drainage The drainage hose can either be connected to a siphon or hung in a wash basin or bath tub. Only original hoses may be used for extension purposes (max. 3m on the floor and then up to 80cm high). The Customer Service stocks hoses in lengths of 2.7 and 4m. Attention! It is absolutely essential to install the drainage hose free of pinches. 0 Water Drainage into a Siphon The grommet on the end of the hose fits all commonly used siphon types.
Setting up and connection instructions Delivery Heads over 1m To pump off the washing / rinsing agent, every washing machine has a pump which transports liquids via the drainage hose up to a height of 1m, calculated from the machine's floor. For delivery heads over 1m, consult the Customer Service. Technical Data Height adjustment Filling quantity (program-dependent) Use Drum speed, spin Water pressure Dimensions (Measurements in mm) 48 Approx. +10/-5mm max.
Guarantee conditions Guarantee conditions Belgium DECLARATION OF GUARANTEE TERMS. Our appliances are produced with the greatest of care. However, a defect may still occur. Our consumer services department will repair this upon request, either during or after the guarantee period. The service life of the appliance will not, however, be reduced as a result. This declaration of guarantee terms is based on European Union Directive 99/44/EC and the provisions of the Civil Code.
Guarantee conditions 12. If, during the guarantee period, repairing the same defect repeatedly is not conclusive, or if the repair costs are considered disproportionate, in agreement with the consumer, the defective appliance may be replaced with another appliance of the same value. In this event, we reserve the right to ask for a financial contribution calculated according to the length of time it has been used. 13.
Customer services Customer services Belgium Tel.: Electrolux Home Products Belgium ELECTROLUX SERVICE Bergensesteenweg 719 1502 Lembeek Province de Liège: S.D.E. Rue Gaucet 26 4020 Liege Fax.: Consumer services 02/363.04.44 02/363.04.00 02/363.04.60 04/343.11.60 04/343.47.
Index Index C Care agent . . . . . . . . . . . . . . . . . . . 10, 17, Child safety feature . . . . . . . . . . . . . . .30, Conditioner . . . . . . . . . . . . 9, 10, 18, 19, Cottons . . . . . . . . . . . . . . . . . . .11, 16, 25, Curtains . . . . . . . . . . . . . . . . . . . . . . . . .15, Customer service . . . . . . . . . . .29, 30, 51, R 19 39 27 27 26 55 D Delicates . . . . . . . . . . . . . . . . . . . . . . . . .12, Detergent . . . . . . . . . . . . . . . . .
Service Service In the section ”What to do if ...” there is a list of some faults which you can remedy yourself. Look there first if a fault occurs. If you find no information there, please consult your Customer Service Centre. Always prepare in advance for the discussion. By doing so you will simplify the diagnosis and the decision on whether customer service is necessary. Note the PNC-number and the S-number. Both can be found on the rating plate on the inside of the door on your washing machine. PNC ...
From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.
