76301K-mn Glaskeramik-Kochfeld Montage- und Gebrauchsanweisung
Sehr geehrte Kundin, sehr geehrter Kunde, lesen Sie bitte diese Gebrauchsanweisung sorgfältig durch. Beachten Sie vor allem den Abschnitt „Sicherheitshinweise“ auf den ersten Seiten. Bewahren Sie bitte diese Gebrauchsanweisung zum späteren Nachschlagen auf. Geben Sie sie an eventuelle Nachbesitzer des Gerätes weiter. 1 3 2 Folgende Symbole werden im Text verwendet: Sicherheitshinweise Warnung: Hinweise, die Ihrer persönlichen Sicherheit dienen.
Inhalt Sicherheit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Entsorgung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Die wichtigsten Merkmale Ihres Gerätes . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Gerätebeschreibung. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Ausstattung Koch- und Bedienfeld . . . . . . . . . . . . .
Montageanweisung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technische Daten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bestimmungen, Normen, Richtlinien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sicherheitshinweise für den Installateur. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Elektroanschluss. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Sicherheit Die Sicherheit dieses Gerätes entspricht den anerkannten Regeln der Technik und dem Gerätesicherheitsgesetz. Zusätzlich sehen wir uns jedoch als Hersteller veranlasst, Sie mit den nachfolgenden Sicherheitshinweisen vertraut zu machen. Elektrische Sicherheit 3 • Montage und Anschluss des neuen Gerätes dürfen nur durch einen konzessionierten Fachmann vorgenommen werden. • Reparaturen am Gerät dürfen nur von Fachkräften durchgeführt werden.
Sicherheit beim Reinigen Zum Reinigen muss das Gerät ausgeschaltet sein. Die Reinigung des Gerätes mit einem Dampfstrahl- oder Hochdruckreiniger ist aus Sicherheitsgründen nicht zugelassen. So vermeiden Sie Schäden am Gerät • Verwenden Sie das Kochfeld nicht als Arbeits- oder Abstellfläche. • Betreiben Sie die Kochzonen nicht mit leerem oder ohne Kochgeschirr. • Glaskeramik ist unempfindlich gegen Temperaturschock und sehr widerstandsfähig, jedoch nicht unzerbrechlich.
2 Entsorgung Verpackungsmaterial entsorgen Alle verwendeten Materialien können uneingeschränkt wiederverwertet werden. Die Kunststoffe sind folgendermaßen gekennzeichnet: • >PE< für Polyethylen, z. B. bei der äußeren Hülle und den Beuteln im Innern. • >PS< für geschäumtes Polystyrol, z. B. bei den Polsterteilen, grundsätzlich FCKW-frei. Altgerät entsorgen 1 Warnung: Damit von dem ausgedienten Gerät keine Gefahr mehr ausgehen kann, bitte vor der Entsorgung unbrauchbar machen.
Die wichtigsten Merkmale Ihres Gerätes • Glaskeramik-Kochfläche: Das Gerät verfügt über eine GlaskeramikKochfläche und 4 schnellaufglühende Kochzonen. Hierbei wird durch besonders leistungsfähige Strahlungsheizkörper die Aufheizdauer des Heizkörpers wesentlich verkürzt. • Sensorfelder: Die Bedienung Ihres Gerätes erfolgt über Touch-Control-Sensorfelder. • Reinigung: Der Vorteil der Glaskeramik-Kochfläche und der Sensorfelder ist ihre Reinigungsfreundlichkeit.
Gerätebeschreibung Ausstattung Koch- und Bedienfeld Einkreis-Kochzone 1200W Dreikreis-Kochzone 2300W Bräterzone 2400W Bedienfeld Sensorfeld Dreikreis Sensorfeld Kontrolllampen Dreikreis „Stop+Go“ Sensorfeld „Ein/Aus“ Kochstufenwahl Einkreis-Kochzone 1200W Sensorfeld Bräterzone Kontrolllampe Bräterzone „Timer“ mit Kochstufenwahl Kontrollanzeigen Anzeige für Kochstufe/Restwärme 9
Digitale Anzeigen Die vier Anzeigefelder, die den vier Kochzonen zugeordnet sind, zeigen: – ¾ nach dem Einschalten, – u bei Anwahl der Warmhaltestufe, – ¿ bis Ç, je nach gewählter Kochstufe, – 2 bis 6 (mit Dezimalpunkt) für Zwischen-Kochstufen – a bei Ankochautomatik, – h bei Restwärme, – l bei eingeschalteter Kindersicherung – e bei Fehlfunktion 1 Sicherheitsabschaltung der Kochzonen Wird eine der Kochzonen nach einer bestimmten Zeit nicht ausgeschaltet oder die Kochstufe nicht verändert, schaltet sich d
Vor dem ersten Gebrauch Erstes Reinigen 1 Das Glaskeramik-Kochfeld feucht abwischen. Achtung: Benutzen Sie keine scharfen, scheuernden Reinigungsmittel! Die Oberfläche könnte beschädigt werden. Bedienung des Kochfeldes Touch Control-Sensorfelder 3 Zur Bedienung der Touch Control-Sensorfelder berühren Sie das gewünschte Feld mit Ihrer Fingerspitze steil von oben, bis entsprechende Anzeigen aufleuchten oder erlöschen, bzw. die gewünschte Funktion ausgeführt wird.
Gerät ausschalten Zum kompletten Ausschalten des Gerätes Sensorfeld „Ein/Aus“ I betätigen. Das Sensorfeld „Ein/Aus“ ca. eine Sekunde lang berühren. 3 Nach dem Abschalten einer einzelnen Kochzone oder des gesamten Kochfeldes wird vorhandene Restwärme mit h (wie „Heiß“) in den digitalen Anzeigen der entsprechenden Kochzonen angezeigt. Kochstufenwahl Zum Einstellen bzw. Verstellen der Kochstufe (u bis Ç) für die gewählte Kochzone.
Bräterzone ein- und ausschalten 1. Die gewünschte Kochstufe einstellen. 2. Zum Ein- oder Ausschalten der Bräterzone legen Sie Ihren Finger flach auf das Sensorfeld „Bräterzone“, bis die Kontrolllampe aufleuchtet oder erlischt.
Dreikreis-Kochzone ein- und ausschalten 3 Je nach Topf- oder Pfannengröße kann bei der Dreikreis-Kochzone mit dem Sensorfeld „Dreikreiszone“ zu der kleineren Kochzone der jeweils größere Heizkreis zugeschaltet werden. Diese können nur zugeschaltet werden, wenn für den kleineren Heizkreis schon eine Kochstufe eingestellt ist. 1. Die gewünschte Kochstufe einstellen. 2. Sensorfeld „Dreikreis“ berühren. Der mittlere Heizkreis wird zugeschaltet. Die untere Kontrolllampe leuchtet.
3. Bei erneutem Berühren des Sensorfelds „Dreikreis“ wird der äußere Heizkreis aktiviert. Die obere Kontrolllampe leuchtet. 4. Zum Ausschalten der äußeren Heizkreise Sensorfeld „Dreikreis“ berühren, der jeweils äußere Heizkreis wird abgeschaltet. Stop+Go-Funktion Bei Betätigung des Sensorfeldes „Stop+Go“ werden alle eingeschalteten Kochzonen gleichzeitig auf die Warmhaltestufe zurückgeschaltet. Die Kontrolllampe des Sensorfeldes „Stop+Go“ leuchtet. Die Warmhaltestufe wird im Display mit u angezeigt..
Kochzone ausschalten 1. Zum Ausschalten die Sensorfelder Kochstufenwahl tig berühren oder mit Sensorfeld Kochstufenwahl stellen. und gleichzeiauf Null zurück- Restwärmeanzeige 2 1 1 16 Nach dem Abschalten einer einzelnen Kochzone oder des gesamten Kochfeldes wird vorhandene Restwärme mit h (wie „Heiß“) in den digitalen Anzeigen der entsprechenden Kochzonen angezeigt. Auch nach dem Ausschalten der Kochzone erlischt die Restwärmeanzeige erst, wenn die Kochzone abgekühlt ist.
Kochen mit der Ankochautomatik Alle vier Kochzonen des Kochfeldes sind in neun Stufen regelbar und sind mit einer Ankochautomatik ausgestattet: – ¿, kleinste Kochstufe – Ç, höchste Kochstufe – a, Ankochfunktion. Wenn Sie die von Ihnen gewünschte Kochstufe mit dem Sensorfeld Kochstufenwahl wählen, arbeitet die Kochzone für eine bestimmte Zeit mit der vollen Leistung und schaltet automatisch auf die eingestellte Fortkochstufe zurück.
Kochen ohne Ankochautomatik Wenn Sie die Kochzone ohne Ankochautomatik nutzen wollen, dann wählen Sie die gewünschte Kochstufe mit dem Sensorfeld Kochstufenwahl . 1. Sensorfeld Kochstufenwahl berühren, um die gewünschte Kochstufe Ç bis ¿ einzustellen. 3 18 Mit den Sensorfeldern Kochstufenwahl jederzeit verstellen.
Kindersicherung Mit der Kindersicherung kann das Kochfeld gegen unerwünschter Benutzung gesichert werden. Kindersicherung einschalten Zum Einschalten der Kindersicherung muss das Gerät eingeschaltet sein, es darf aber keine Kochzone eingeschaltet sein. 1. Das Sensorfeld ca. drei Sekunden lang berühren.. Zur Bestätigung ertönt ein Signalton. 2. Ein beliebiges Sensorfeldern Kochstufenwahl berühren. In den Anzeigen erscheint l, die Kindersicherung ist aktivert.
Kindersicherung überwinden Die Kindersicherung kann für die einmalige Benutzung des Gerätes (bis zum nächsten Ausschalten des Gerätes) überwunden werden. Beim nächsten Einschalten ist die Kindersicherung automatisch wieder aktiv. 1. Das Gerät einschalten. Bei aktiver Kindersicherung wird l angezeigt. 2. Gleichzeitig zwei beliebige Sensorfelder Kochstufenwahl rühren. und be- Zur Bestätigung ertönt ein Signalton.
Kindersicherung ausschalten 1. Das Gerät einschalten. Bei aktiver Kindersicherung wird l angezeigt. 2. Das Sensorfeld ca. drei Sekunden lang berühren.. Zur Bestätigung ertönt ein Signalton. 3. Ein beliebiges Sensorfeld Kochstufenwahl berühren. Die Anzeigen werden dunkel, die Kindersicherung ist ausgeschaltet. Das Gerät schaltet nach einigen Sekunden automatisch ab.
Timer 3 Sie können den Timer auf zwei Arten benutzen: – als Abschaltautomatik. Sie stellen für eine Kochzone eine Gardauer ein, nach deren Ablauf schaltet sich die Kochzone automatisch ab. Diese Funktion kann für mehrere Kochzonen gleichzeitig genutzt werden. – als Kurzzeitmesser ohne Schaltfunktion („Eieruhr“), nach Ablauf der eingestellten Zeitdauer ertönt ein akustisches Signal. Der Kurzzeitmesser kann grundsätzlich nicht genutzt werden, wenn eine Kochzone eingeschaltet ist.
2. Während die Kontrolllampe schnell blinkt, mit den Sensorfeldern Timereinstellung + oder - für diese Kochzone die gewünschte Zeitdauer bis zum automatischen Abschalten einstellen (z.B. 15 Minuten). Nach wenigen Sekunden wird die Abschaltautomatik aktiviert Die Kontrolllampe blinkt jetzt langsamer und die Restgardauer wird während des Ablaufs im Display angezeigt. Ist die Abschaltautomatik bei mehreren Kochzonen eingestellt, so gilt dies für die Kochzone mit der kürzesten Restgardauer.
Abschaltautomatik vorzeitig beenden Sie haben zwei Möglichkeiten die Abschaltautomatik vorzeitig abzuschalten: Kochzone und Timer gleichzeitig abschalten 1. Mit dem Sensorfeld Kochstufenwahl - die gewünschte Kochzone auf Null zurückstellen: Kochzone und Timer schalten ab. Timer ausschalten - Kochzone bleibt aktiv 1. Mit dem Sensorfeld Timer die gewünschte Kochzone auswählen. Die entsprechende Kontrolllampe blinkt dann schneller. 2.
Anwendung, Tabellen, Tipps Kochgeschirr Je besser der Topf, desto besser das Kochergebnis. • Gutes Kochgeschirr erkennen Sie am Topfboden. Der Boden sollte so dick und plan wie möglich sein. • Achten Sie beim Neukauf von Töpfen und Pfannen auf den BodenDurchmesser. Hersteller geben oft den oberen Durchmesser des Geschirrrandes an. • Geschirr mit Aluminium- oder Kupferböden kann metallische Verfärbungen auf der Glaskeramikfläche hinterlassen, die nur schwer oder gar nicht mehr zu entfernen sind.
• Topfboden und Kochzone sollten gleich groß sein. • Bei Verwendung eines Schnellkochtopfes verkürzt sich die Garzeit um bis zu 50%. Tipps zum Kochen mit und ohne Ankochautomatik Die automatische Ankochfunktion eignet sich für: • Gerichte, die kalt aufgesetzt werden, bei hoher Leistung erhitzt werden und auf der Fortgarstufe nicht ständig beobachtet werden müssen, • Gerichte, die in die heiße Pfanne gegeben werden.
Anhaltswerte zum Kochen Die Angaben in der folgenden Tabelle sind Richtgrößen. Welche Schalterstellung für Kochvorgänge erforderlich ist, hängt von der Qualität der Töpfe und von der Art und Menge der Lebensmittel ab. Schalterstellung Ankochzeit der Automatik1) (Min.
Reinigung und Pflege Kochfeld 1 3 Achtung: Reinigungsmittel dürfen nicht auf die heiße Glaskeramikfläche gelangen! Alle Reinigungsmittel müssen nach der Reinigung mit ausreichend klarem Wasser entfernt werden, da sie beim Wiederaufheizen ätzend wirken können! Verwenden Sie keine aggressiven Reinigungsmittel, wie z.B. Grill- oder Backofensprays, grobe Scheuermittel bzw. kratzende Topfreiniger. Reinigen Sie die Glaskeramik-Kochfläche nach jedem Gebrauch, wenn sie handwarm oder kalt ist.
1 Spezielle Verschmutzungen 1. Eingebrannten Zucker, geschmolzenen Kunststoff, Aluminiumfolie oder andere schmelzbare Materialien sofort, noch im heißen Zustand mit einem Reinigungsschaber entfernen. 1 3 Achtung: Beim Hantieren mit dem Reinigungsschaber auf der heißen Kochzone besteht Verbrennungsgefahr! 2. Anschließend das abgekühlte Kochfeld normal reinigen. Sollte die Kochzone mit darauf geschmolzenen Materialien bereits abgekühlt sein, erwärmen Sie diese nochmals vor der Reinigung.
Was tun, wenn … Abhilfe bei Störungen 1 Möglicherweise handelt es sich bei einer Störung nur um einen kleinen Fehler, den Sie anhand nachfolgender Hinweise selbst beheben können. Führen Sie keine weiteren Arbeiten selbst aus, wenn nachstehende Informationen im konkreten Fall nicht weiterhelfen. Warnung! Reparaturen am Gerät dürfen nur von Fachkräften durchgeführt werden. Durch unsachgemäße Reparaturen können erhebliche Gefahren für den Benutzer entstehen.
… nach dem Ausschalten der Kochzonen kein h für Restwärme in der Anzeige erscheint? Überprüfen Sie, ob – die Kochzone nur kurz in Betrieb gewesen und daher noch nicht heiß genug ist. Sollte die Kochzone heiß sein, rufen Sie bitte den Kundendienst. … sich eine Kochzone nicht ausschalten lässt? Überprüfen Sie, ob – die Berührungsschalter durch ein feuchtes Tuch oder mit Flüssigkeit teilweise bedeckt sind. – die Stop+Go-Funktion eingeschaltet ist.
Montageanweisung 1 Achtung! Montage und Anschluss des neuen Gerätes dürfen nur durch einen konzessionierten Fachmann vorgenommen werden. Beachten Sie bitte diesen Hinweis, da sonst bei auftretenden Schäden der Garantieanspruch entfällt.
Bestimmungen, Normen, Richtlinien Dieses Gerät entspricht folgenden Normen: • EN 60335-1 und EN 60335-2-6 bezüglich der Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke und • EN 60350 bzw. DIN 44546 / 44547 / 44548 bezüglich der Gebrauchseigenschaften von Elektroherden, Kochmulden, Backöfen und Grillgeräten für den Haushalt.
1 Sicherheitshinweise für den Installateur • In der elektrischen Installation ist eine Einrichtung vorzusehen, die es ermöglicht, das Gerät mit einer Kontaktöffnungsweite von mind. 3 mm allpolig vom Netz zu trennen. Als geeignete Trennvorrichtungen gelten z.B. LS-Schalter, Sicherungen (Schraubsicherungen sind aus der Fassung herauszunehmen), FISchalter und Schütze. • Dieses Gerät entspricht bezüglich des Schutzes gegen Feuergefahr der EN 60 335-2-6.
Elektroanschluss 1 Vor dem Anschluss ist zu prüfen, ob die Nennspannung des Gerätes, das ist die auf dem Typenschild angegebene Spannung, mit der vorhandenen Netzspannung übereinstimmt. Das Typenschild befindet sich auf der unteren Verkleidung des Kochteils. Die Heizkörperspannung beträgt AC230V~. Auch bei älteren Netzen mit AC220V~ arbeitet das Gerät einwandfrei. Der Netzanschluss des Kochteils ist so auszuführen, dass eine allpolige Trennmöglichkeit mit einer Kontaktöffnungsweite von mindestens 3mm, z.
Montage 37
Service Im Kapitel „Was tun, wenn …“ sind einige Störungen zusammengestellt, die Sie selbst beheben können. Sehen Sie im Störungsfall zunächst dort nach. Handelt es sich um eine technische Störung? Dann wenden Sie sich bitte an unseren Kundendienst oder einen unserer Service-Partner (Adressen und Telefonnummern finden Sie im Verzeichnis „Kundendienststellen“). Bereiten Sie das Gespräch in jedem Fall gut vor. Sie erleichtern so die Diagnose und die Entscheidung, ob ein Kundendienstbesuch nötig ist.
From the Electrolux Group. The world´s No.1 choice. Die Electrolux-Gruppe ist der weltweit größte Hersteller von gas- und strombetriebenen Geräten für die Küche, zum Reinigen und für Forst und Garten. Jedes Jahr verkauft die Electrolux-Gruppe in über 150 Ländern der Erde über 55 Millionen Produkte (Kühlschränke, Herde, Waschmaschinen, Staubsauger, Motorsägen und Rasenmäher) mit einem Wert von rund 14 Mrd. USD.