78001KF-N Ceramic glass induction hob Installation and Operating Instructions
Dear Customer, Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appliance. 1 3 2 2 The following symbols are used in the text: Safety instructions Warning! Notes that concern your personal safety. Important! Notes that show how to avoid damage to the appliance.
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions 1 Safety instructions 3 5 Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty. This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Correct use • This appliance should be used only for normal domestic cooking and frying of food.
Safety during use • Remove stickers and film from the glass ceramic. • There is the risk of burns from the appliance if used carelessly. • Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware. • Overheated fat and oil can ignite quickly. When cooking with fat or oil (e.g. frying chips) do not leave the appliance unattended. • Switch the cooking zones off after each use.
Description of the Appliance Cooking surface layout Induction cooking zone 2300W with power function 3200W Control panel Induction cooking zone 2300W with power function 3200W Induction cooking zone 2300W with power function 3200W Control panel Induction cooking zone 2300W with power function 3200W The cooking surface is divided into four cooking zones.
Control panel layout Cooking zone indicators Timer Timer Timer display On/Off with power indicator STOP+GO Power function Lock Heat setting selection Power function Display Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.
Displays Display ¾ u Description Cooking zone is switched off Keep warm setting Keep warm setting/STOP+GO function is set ¿ - Ç Heat settings Heat setting is set 2 - 6 Heating setting plus Intermediate heat setting is set decimal point a Automatic warm up function Automatic warm-up function is activated e Fault Malfunction has occurred f Pan detection Cookware is unsuitable or too small or no cookware has been placed on the cooking zone h Residual heat Cooking zone is still hot l Chil
Operating the appliance 3 Use the induction cooking zones with suitable cookware. Switching the appliance on and off Control panel 3 Display Switch on Touch for 2 seconds ¾ / h Switch off Touch for 1 second h / none Pilot light lights up goes out After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
Switching the STOP+GO function on and off The STOP+GO function simultaneously switches all cooking zones that are switched on to the keep warm setting and then back to the heat setting that was previously set. This function can be used to briefly interrupt and then continue the cooking process e.g. to take a telephone call.
The length of time that the automatic warm up function operates depends on the heat setting selected. Heat setting Length of the automatic warm up [min:sec] Intermedi- Length of the ate automatic warm up heat [min:sec] setting v 0:10 1 0:10 2 0:10 2. 1:20 3 3:10 3. 4:20 4 5:50 4. 8:10 5 10:10 5. 10:30 6 2:00 6.
Using the child safety device The child safety device prevents unintentional use of the appliance. Setting the child safety device Step Control panel 1. Switch on the appliance (Do not set a heat setting) 2. Touch 3. Touch Display/Signal ¾ until the signal sounds Acoustic signal l Appliance switches off. The child safety device is set. Releasing the child safety device Step 1. Control panel Switch on the appliance 2. Touch 3.
Switching the power function on and off The power function makes more power available to the induction cooking zones, e.g. to bring a large quantity of water to the boil quickly. The power function is activated for 10 minutes. After that the induction cooking zone automatically switches back to heat setting 9. 3 Control panel Display Switch on Touch p Switch off Touch Ç Touch Ç If the power function has ended, the cooking zones automatically switch back to the heat setting set previously.
Using the timer All cooking zones can use each use one of the two timer functions at the same time. 3 3 Function Condition Outcome after the time has elapsed Automatic cut-out a heat setting is set acoustic signal 00 flashes Cooking zone switches off Countdown timer cooking zones not in use acoustic signal 00 flashes If a cooking zone is switched off, the timer function set is also switched off.
3 3 If the pilot light is flashing more slowly, the heat setting indicator appears again and the heat setting can be re-set or modified. If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes. Setting the time Step Control panel field 1. zone 2.
Changing the time Step Control panel field 1. Select cooking Pilot light of the cooking zone selected flashes faster The time remaining is displayed zone 2. Display Touch or for 01 to 99 minutes the cooking zone selected After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. Displaying the time remaining for a cooking zone Step Control panel field 1.
Cooking over two cooking zones 3 Großes Kochgeschirr kann mit zwei Kochzonen gleichzeitig erhitzt werden. Dazu eignen sich jeweils die zwei Kochzonen der linken oder rechten Seite des Kochfelds. 1. Kochgeschirr zentriert auf beide Zonen aufsetzen. Das Kochgeschirr muss beide Kreuz-Markierungen mindestens bis zur Mitte bedecken. 2. Für beide Kochzonen die gleiche Kochstufe einstellen (max. Stufe 8). Es kann bei verschiedenen Kochgeschirren zu Unterschieden in der Wärmeverteilung kommen.
Induction cooking zones • In the event of overheating (e.g. when a pan boils dry) the cooking zone automatically switches itself off. _ is displayed. Before being used again, the cooking zone must be set to 0 and allowed to cool down. • If cookware that is not suitable is used, f flashes in the display and after 2 minutes the display for the cooking zone switches itself off.
Cookware for induction cooking zones Cookware material Cookware material Steel, enamelled steel yes Cast iron yes Stainless steel 3 3 Suitable if appropriately labelled by the manufacturer Aluminium, copper, brass --- Glass, ceramic, porcelain --- Cookware for induction cooking zones is labelled as suitable by the manufacturer. Suitability test Cookware is suitable for induction cooking, if … • ... a little water on an induction cooking zone set to heat setting 9 is heated within a short time.
Examples of cooking applications The information given in the following table is for guidance only. Heat setting Cooking process 0 V suitable for Cook time Tips/Hints Off position Keeping food warm Keeping cooked foods warm as required Cover Melting Hollandaise sauce, melting butter, chocolate, gelatine 5-25 mins. Stir occasionally Solidifying Fluffy omelettes, baked eggs 10-40 mins.
Cleaning and care 1 1 1 Take care! Risk of burns from residual heat. Important Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. Important Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1. Wipe the appliance with a damp cloth and a little washing up liquid. 2. Rub the appliance dry using a clean cloth. Removing deposits 1.
What to do if … Problem Possible cause Remedy The appliance cannot be More than 10 seconds have Switch the appliance on switched on or is not oper- passed since the appliance again.
Problem Possible cause Remedy Acoustic signal sounds and The On/Off sensor field has Do not place any objects appliance switches itself on been covered up, e.g.
3 If the appliance has been operated incorrectly, the visit from the service technician or dealer may not take place free of charge, even during the warranty period. Disposal 2 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at your local waste disposal facilities.
Installation Instructions Safety instructions 1 1 The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed.
A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors. Sticking on the seal • Clean the worktop in the area of the cut-out section.
Assembly 27
Rating Plate 78001KF-N 55GDDD4AG 949 592 510 230 V 50 Hz Induction 7,4 kW 2,2 kW AEG-ELECTROLUX 29
Warranty conditions Great Britain Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity or gas supply stated on the rating plate.
Service and Spare Parts If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning: 0870 5 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www. serviceforce.co.
www.electrolux.com www.aeg-electrolux.co.
