Installation guide

UPS 40 – 160 kVA, 400V 50/60 Hz output
User’s and Installation Guide
1023294
Revision C
35
6 Control Panel
The control panel, located on the front door of the UPS, contains LCD screen and pushbutton
switches to control the operation of the UPS, and to display the status of the UPS system.
Figure 25. UPSControlpanel.
The Control Panel consists of the following:
• ALiquidCrystalDisplay(LCD)screen(1)
• Ahorizontalrowofpushbuttonswitches(2)
• Averticalcolumnofstatusindicators(3)
When the unit powers up, the screen displays the Powerware logo. To advance to the Main menu
and Mimic screen, press any Control Panel pushbutton once. After approximately 30 minutes on
inactivity, the display screen darkens. To restore the screen, press any pushbutton once.
6.1 Identification of the display areas
The LCD screen on the Control Panel provides an operator interface with the UPS system.
You can use the LCD screen and the pushbuttons to:
• LookatalogofUPSevents(alarms,notices,andcommands)
• MonitorUPSoperation
• SetUPSparameters
• ControlUPSoperation
Figure 26. DisplayareasoftheLCDscreen.