Installation guide

UPS 40-160 kVA, 400 V 50/60 Hz output
User’s and Installation Guide
1023294
Revision C
52
The printed log entries contain a time and date stamp and the alarm text message.
Terminal mode uses this format for printing alarm entries:
MM DD YYYY HH:MM:SS.hh KYWDMESSAGE **** <CR><LF>
Where: Equals:
MM Month (2 digits)
YYYY Year (4 digits)
DD Day (2 digits)
HH Hour (2 digits)
MM Minute (2 digits)
SS Second (2 digits)
hh Hundredths of Second (2 digits)
KYWD Keyword (ALARM, NOTICE, COMMAND, or STATUS)
****   SystemDiagnosticInformation
<CR>   CarriageReturnCharacter(ASCII13)
<LF>   LineFeed(ASCII10)
An alarm message is prefixed by the word “CLEAR” whenever an alarm is entered into the
Event History Log with a cleared status.
IfaportisoperatinginTerminalmodeandisconnectedtoacomputer,youcanpress[Esc][H]
to print the entire log with a firmware version header.
Here is a sample Event History Log printout:
03/11/2004 14:13:12.954 NOTICE: Battery Voltage Low