Installation guide
UPS 40 – 160 kVA, 400V 50/60 Hz output
User’s and Installation Guide
1023294
Revision C
57
Figure 38. Wiringdiagramofthe120and160kVATiecabinet
Please refer to main User’s and Installation Guide (1022403) for sizing cables
Wiring procedure:
1. If not already open, unfasten front door latch and swing door open.
2. Remove the door by opening a screw from the bottom hinge.
3. Place the door to its correct position.
4. Remove the switches S11, S21, S31 and the screws from the plate.
5. Remove cabinet top or bottom wire entry landing plate to drill or punch wire ways.
Cartridgefuselist(S11,S21,S31)
UPSsize Type Rating Size(IEC269) P/N
120kVA gL/gG 200A690VAC 2NH 8052350
160 kVA gL/gG 250A690VAC 2NH 1024563