Operating instructions

What to do if ...
818 34 51-00/7 91
Temperature display shows
a square or a letter.
There is a function fault.
Please inform customer
service. Do not open the
doors of the appliance
again.
Warning tone sounds, red
warning indicator light and
temperature display are
flashing.
Temperature warning.
Please check in "Control
and Information System"
section.
Food items in the 0 °C
fridge section are frozen.
High moisture content in
the food items.
Move the food items
(distribute them around
the 0 °C fridge section as
much as possible, do not
push them against the wall).
Hold down the “+” and “-”
buttons for the fridge for
approximately 5 seconds in
order to switch over to an
increased operating
temperature. A short
acoustic signal will sound.
To switch back to the
normal operating
temperature, hold down
the “+” and “-” buttons for
the fridge for
approximately 5 seconds
again. A short acoustic
signal will sound.
Interior illumination does
not function.
Light bulb is defective.
Important: The interior
lighting switches off auto-
matically after 7 minutes.
Please refer to "Replacing
the Light Bulb" section.
Water on the floor or on
storage shelves.
Water drain hole is
blocked.
See the "Maintenance and
Cleaning" section.
Heavy build up of frost,
possibly also on the door
seal.
Door seal is not air tight
(possibly after changing
over the hinges).
Carefully warm the leak-
ing sections of the door
seal with a hair dryer (not
hotter than approx. 50 °C).
At the same time shape the
warmed door seal by hand
such that it sits correctly.
Symptom Possible Cause Solution
Downloaded from Fridge-Manual.com Manuals