User manual

Replacing the lamp

1. Disconnect the appliance.

2. Push the movable part to unhook the

lamp cover (1).

3. Remove the lamp cover (2).

4. Replace the lamp with one of the same

power and specifically designed for do-

mestic appliances only.

5. Install the lamp cover.

6. Connect the appliance.

7. Open the door. Make sure that the lamp comes on.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "Installation".

3. If necessary, replace the defective door gaskets. Contact the Service Center.

TECHNICAL DATA

Dimension of the recess

Height 880 mm

Width 560 mm

Depth 550 mm

Voltage 230 V

Frequency 50 Hz

The technical information are situated in the rating plate on the internal left side of the

appliance and in the energy label.

INSTALLATION

WARNING!

Read the "Safety Information" carefully for your safety and correct operation of the appli-

ance before installing the appliance.

Positioning

This appliance can be installed in a dry, well ventilated indoor (garage or cellar) also, but for

optimum performance install this appliance at a location where the ambient temperature

corresponds to the climate class indicated on the rating plate of the appliance:

Technical data 37