User manual
www.aeg-automotive.com24
Before use
Warning!
Before using this device be sure to read the ope-
Ensure adequate ventilation.
Connecting the device
1. Connect the required terminal connection cable
2.
3.
Note:
vehicle chassis (Please refer to the auto maker‘s in-
4. Plug the charger plug into a 230V power socke.
2A 6A 10A
10A
AV
%
A
V
V/A/%
5. Before beginning the charging process, ensure
the charging current too high can damage/dest-
Start charging
1.
select the respective charging mode, 12 V or 24
2.
2 A / 6 A / 10 A
3.
charging process.
The charging process will now start. The “Charge”
Note:
switch to trickle charge to maintain the charging
Switching the display
following parameters:
V = charging voltage
A = charging current
-