User manual

20
Warning! Fire hazard!
Always first disconnect the negative terminal from the battery. There otherwise is a fire
hazard!
1. Disconnect the power inverter from the battery.
2. Lift off the fuse cover [1]. Remove the nuts [2].
3. Replace the fuse [3] with an equivalent fuse (BF1 fuse 150 A, max. 32 V).
4. Secure the nuts (2), then the cover (1).
5. Connect the power inverter to the battery.
CLEANING, CARE AND MAINTE-
NANCE
▪
To prevent corrosion, wipe off any battery fluid that has come into contact with the
clamps.
▪
Do not use abrasive utensils for cleaning.
Service
Should you have any questions regarding commissioning or operating in spite of study-
ing these operating instructions, or if a problem should occur against all expectations,
please get in contact with your specialist supplier.
Disposal
The packaging consists of non-contaminating materials that you can dispose of at your
local recycling point.
Do not throw electrical appliances in with domestic waste! In accordance
with European Directive 2002 / 96 / EC for waste electrical and electronic
equipment (WEEE) and conversion to national law, used electrical appliances must be
collected separately and taken to a recycling point. For ways to dispose of old electrical
appliances please contact your community or city administration.
Illustrations may vary slightly from the product itself. We reserve the right to modify the
product in accordance with technical advances. Decoration not included.