User manual

www.aeg-automotive.com30
Monitor menu settings
Image 14
Guidelines On / Off
Language English / German
Exit
Brightness
Contrast
Colour

 on the
key lights up blue.

Press the (M) button to access menu mode (13).
The display will now show the menu settings for
approx. 7 seconds. The respective adjustment
mode will be displayed in yellow font.

Each time the button (13) is pressed again the
menu will advance to the next level of settings.

Use the buttons (14) and (15) to increase, de-
crease or advance the following menu items:
Brightness: adjusts the monitor brightness
Contrast: adjusts the monitor contrast
Color: adjusts the monitor‘s color intensity
Guidelines: can be activated or deactivated
Language: set language to English / German
Exit: leave menu mode

In “Exit” mode press a (14) or (15) button to leave
the menu mode.
Testing the backup camera system

First engage the hand brake and verify the car
is not in gear. Turn the ignition to II, do not start
the engine!

Plug in the monitor (3) by plugging the monitor
cable (2) into the 12 V vehicle outlet. Press the
button (12) to power on the monitor. The symbol
on the button must light up blue.

Now put the vehicle into reverse. The transmit-
ted camera image will now be displayed on the
monitor.
Replacing fuses
Image 15
1. Unscrew the retaining screw.
2. Remove the contact cap, spring and the 1 A
(Ampere) fuse.
3. Assemble all parts and the new 1 A fuse in the
order shown and tighten the retaining screw.
Halteschraube
Kontaktklappe Feder
Stecker 12 V
Kfz-Anschluss
Sicherung 1 A (Ampere)