User manual

21
Place guide (A) on the inside part
of the furniture door, up and down
as shown in the figure and mark
the position of external holes.
After having drilled holes, fix the
guide with the screws supplied.
20 mm
A
50mm
PR166
PR33
C
A
Fix cover (C) on guide (A) until it
clips into place.
Open the appliance door and the
furniture door at 90¡. Insert the
small square (B) into guide (A).
Put together the appliance door
and the furniture door and mark
the holes as indicated in the figu-
re. Remove the squares and drill
holes with ¿ 2 mm at 8 mm from
the outer edge of the door. Place
the small square on the guide
again and fix it with the screws
supplied.
8mm
PR167
A
B