ARCTIS Congélateurs Notice d’utilisation 818 14 19-03/0
Chère Cliente, Cher Client Veuillez lire attentivement la notice d’utilisation avant d’installer et d’utiliser l’appareil. Conservez cette notice d’utilisation avec votre appareil. Si l’appareil devait être vendu ou cédé à une autre personne, assurez-vous que la notice d’utilisation l’accompagne. Le nouvel utilisateur pourra alors être informé du fonctionnement de celui-ci et des avertissements s’y rapportant. Ces avertissements ont été rédigés pour votre sécurité et celle d’autrui.
Sommaire Avertissements importants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Protection de l’environnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Information sur l’emballage de l’appareil . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Mise au rebut des anciens appareils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Transport de l’appareil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sommaire Congélation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Conservation de produits congelés et surgelés . . . . . . . . . . . . . . . . . . . . . 24 Fabrication des glaçons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Symboles de produits congelés/Calendrier de congélation . . . . . . . . . . . 25 Chargement maximal/Limite de chargement . . . . . . . . . . . . . . . . . . . . . . . 25 Dégivrage . .
1 Avertissements importants La sécurité de nos appareils frigorifiques est conforme aux règles reconnues de la technique et à la législation sur la sécurité des appareils. Nous vous rappelons toutefois les règles de sécurité suivantes : Utilisation • Cet appareil a été conçu pour être utilisé par des adultes. Veillez donc à ce que les enfants n’y touchent pas ou qu’ils ne l’utilisent pas comme un jouet. • Votre appareil est destiné à un usage domestique.
Avertissements importants • Si votre ancien appareil doit être mis au rebus, veillez à rendre inutilisable tout ce qui pourrait représenter un danger pour un enfant (fermeture de porte, câble d’alimentation) Reportez-vous à la rubrique «Protection de l’environnement» Utilisation quotidienne • Ne placez pas dans l’appareil des produits contenant du gaz ou des liquides inflammables. • Ne placez ni bouteilles ni boîtes de boissons gazeuses dans l’appareil, elles pourraient éclater.
Avertissements importants Installation • Assurez-vous, après avoir installé l’appareil, que celui-ci ne repose pas sur le câble d’alimentation. • L’appareil se réchauffe sensiblement au niveau du condenseur et du compresseur. Veillez à ce que l’air circule librement tout autour de l’appareil. Une ventilation insuffisante entraînerait un mauvais fonctionnement et des dommages sur l’appareil. • Suivez les instructions données pour l’installation.
Protection de l’environnement Information sur l’emballage de l’appareil • Tous les matériaux marqués par le symbole g sont recyclables. Déposez-les dans une déchetterie prévue à cet effet (renseignez-vous auprès des services de votre commune) pour qu’ils puissent être récupérés et recyclés. • Les pièces en matière plastique sont identifiées par des abréviations normalisées.
Transport de l’appareil Pour une meilleure préhension, deux prises sont prévues à l’avant, au socle de l’appareil et à l’arrière, au haut de l’appareil. 0 1. Saisissez l’appareil par les prises, dans la position représentée et transportez-le. Retrait de la protection pour le transport L’appareil et ses équipements intérieurs sont protégés pour le transport. 0 1. Retirez tous les rubans adhésifs et éléments de rembourrage à l’intérieur de l’appareil sauf la plaque signalétique. 2.
Installation Emplacement Placez de préférence votre appareil loin d’une source de chaleur (chauffage, cuisson ou rayons solaires trop intenses) dans un local bien ventilé et sec. La température ambiante influence la consommation électrique et le bon fonctionnement de l'appareil. Pour son bon fonctionnement, il est impératif de respecter les températures ambiantes du local où doit être placé l’appareil, suivant la classe climatique (indiquée sur la plaque signalétique) pour lequel il est prévu.
Installation Ventilation Veillez à ce que l’air circule librement tout autour de l’appareil. Si toutefois, vous désirez placer l’appareil dans une niche ou directement sous un élément, il est indispensable de laisser un espace de 10 cm entre le dessus de l’appareil et un élément supérieur. Les conduits de ventilation ne doivent en aucun cas être obstrués. Mise à niveau de l’appareil 0 1. Placez l’appareil sur un sol plat et rigide.
Installation Raccordement électrique Votre appareil ne peut être branché qu'en 230 V monophasé. Vérifiez que le compteur électrique peut supporter l'intensité absorbée par votre appareil compte tenu des autres appareils déjà branchés. Calibre des fusibles en ligne (un par phase) 10 A en 230 V. Important (pour la France) L'installation doit être réalisée conformément aux règles de l'art, aux prescriptions de la norme NF.C 15.100 et aux prescriptions de l'E.D.F.
Réversibilité de la porte La porte de cet appareil est réversible : son sens d’ouverture peut être modifié en fonction du souhait de l’utilisateur. 1 Lors de la réversibilité de la porte, l’appareil doit être débranché. 0 1. Ouvrez la porte et retirez la plin- the en tirant vers l’avant. Déplacez le cache sur la côté opposé de la plinthe. Fermez la porte. 2. Dévissez les vis à empreinte cruciforme du palier de porte inférieur et retirez-le vers le bas lorsque la porte est fermée. 3.
Réversibilité de la porte 4. Enlevez la ferrure de la porte en bas à droite et le cache du de palier de porte en bas à gauche (1, 2) et insérez la ferrure livrée dans la porte en bas à gauche (3). Retirez précautionneusement la porte vers l’avant et mettez-la de côté. 5. Déplacez le tourillon supérieur vers la gauche. 6. Poussez précautionneusement la porte sur le tourillon supérieur et fermez. 7. Deplacez la poignée de porte de la gauche vers la droite et rebouchez les trous avec les caches fournis.
8. Insérez et vissez le palier de porte inférieur avec le tourillon de la porte en bas à gauche. 9. Ouvrez la porte et replacez la plinthe. La réversibilité de la porte une fois effectuée, contrôlez que le joint magnétique adhère à la carrosserie. Si la température à l’intérieur de la pièce est trop basse (en hiver, par exemple), il se peut que le joint n’adhère pas parfaitement.
Description de l’appareil Vue de l’appareil (Selon le modèle) á à â Bandeau de commande ä Tiroir (uniquement pour la conservation) Lors du dégivrage, le tiroir inférieur sert également à recueillir l’eau de dégivrage. Plateau de congélation Tiroirs et/ou abattants (pour la conservation et la congélation) Plateau de congélation Sous le compartiment de congélation supérieur du congélateur se trouve un plateau de congélation avec un bac à glaçons et un accumulateur à froid.
Description de l’appareil Accumulateur de froid Votre appareil est équipé d’un accumulateur à froid. Il doit être placé sur le plateau de congélation. Il vous permet: • d’augmenter l’autonomie de votre appareil en cas de coupure de courant, • de transporter des produits congelés ou surgelés, • de maintenir le froid au niveau le plus bas dans une glacière de pique nique, • de maintenir le froid dans les produits surgelés ou congelés durant la période de dégivrage.
Description de l’appareil Touches de réglage de la température Le réglage de la température se fait à l’aide des touches «+» (PLUS CHAUD) et «-» (PLUS FROID). Les touches sont en relation avec l’indicateur de température. • Lorsqu’on appuie sur une des deux touches «+» ou «-», l’indicateur de température passe de l’affichage de la température REELLE (voyant correspondant allumé) à l’affichage de la température de CONSIGNE (voyant correspondant clignotant).
Touche FROSTMATIC Cette fonction FROSTMATIC accélère la congélation des denrées fraîches et protège en même temps les marchandises déjà entreposées d’un réchauffement indésirable. 0 1. En appuyant sur la touche FROSTMATIC, on enclenche la fonction FROSTMATIC. Le voyant jaune s’allume. 2. En enfonçant à nouveau la touche FROSTMATIC, on peut à tout moment mettre fin à la fonction FROSTMATIC. Le voyant jaune s’éteint.
Mise en service 0 1. Branchez l’appareil. 2. Appuyez sur la touche MARCHE/ARRET. 3. Le voyant verte s’allume. Un signal sonore retentit et le voyant rouge ALARME clignote indiquant que la température nécessaire au stockage des aliments n’est pas encore atteinte. 4. Appuyez sur la touche SUPPRESSION ALARME pour arrêter le signal sonore. 5. Réglez la température sur -18°C ou une température inférieure (-19 °C ou -22 °C ...) (voir chapite «Réglage de la température»). 6.
Arrêt de l’appareil 0 1. Appuyez sur la touche MARCHE/ARRET jusqu’à ce que le voyant vert s’éteigne. En cas d’absence prolongée ou de non-utilisation 0 1. Appuyez sur la touche MARCHE/ARRET jusqu’à ce que le voyant vert s’éteigne. 2. Débranchez et videz l’appareil. 3. Dégivrez et nettoyez soigneusement l’appareil (voir chapitre «Nettoyage et entretien»). 4. Maintenez la porte entrouverte pendant toute la durée de nonutilisation.
Système de contrôle et d’information Le système de contrôle et d’information se compose de l’indicateur de température, et du signal sonore et visuel du voyant rouge alarme. Le système avertit: – lorsque la température devient trop élevée dans l’appareil; – en cas d’anomalie de fonctionnement de l’appareil. Alarme Le voyant rouge ALARME clignote et un signal sonore retentit dès que la température dans l’appareil remonte anormalement.
Congélation Outre le tiroir inférieur, qui ne sert qu’au stockage, tous les autres tiroirs et/ou abattants conviennent pour la congélation des aliments. Attention! • Pour une bonne conservation des produits surgelés et congelés, la température à l’intérieur du compartiment congélateur doit être maintenue égale ou inférieure à -18 °C.
Conseils: • Pour l’emballage des aliments à congeler, utilisez : – des sacs et films de congélation en polyéthylène, – des boîtes spéciales pour aliments congelés, – du papier aluminium extra fort. • Pour la fermeture des sacs et films, utilisez: des pinces en plastique, des élastiques ou des rubans adhésifs. • Avant la fermeture, chassez l’air des sacs et films car l’air favorise le dessèchement des produits congelés. • Formez des petits paquets plats, la congélation sera plus rapide.
Fabrication des glaçons 0 1. Remplissez les bacs jusqu’aux trois quarts de leur hauteur, de manière à permettre l’expansion de la glace. Si votre eau est particulièrement riche en sels minéraux (calcaire notamment), remplissez vos bacs avec de l’eau minérale non gazeuse. 2. Les bacs en matière plastique vous assurent un démoulage plus facile. Si toutefois vous désirez obtenir des glaçons plus rapidement, nous vous conseillons d’utiliser des bacs métalliques que vous trouverez dans le commerce.
Dégivrage Périodiquement (toutes les 2 ou 3 semaines) à l’aide d’une spatule en plastique, grattez la mince couche de givre qui recouvre les parois. N’utilisez jamais de couteau ou d’objet métallique pour gratter la couche de givre, vous risquez de détériorer irrémédiablement l’évaporateur. Une ou deux fois par an, ou chaque fois que l’épaisseur du givre excède 4 mm environ, il est recommandé de procéder, au dégivrage complet.
Nettoyage et entretien Il est indispensable de maintenir votre appareil en parfait état de propreté. 1 Attention! • Ne procédez au nettoyage qu’après avoir débranché l’appareil. • Ne nettoyez jamais l’appareil au jet de vapeur. L’humidité pourrait pénétrer dans les composants électriques et la vapeur chaude peut endommager les pièces en plastique. • L’appareil doit être sec avant la remise en marche.
2 Conseils pour économiser l’énergie • Ne disposez pas l’appareil à proximité d’une cuisinière, d’un radiateur ou d’autres sources de chaleur. Si la température ambiante est élevée, le compresseur fonctionne plus fréquemment et plus longtemps. • Assurez une ventilation et une aération suffisantes au niveau du socle et à l’árrière de l’appareil. Ne obstruez jamais les ouvertures de ventilation. • Ne placez pas d’aliments chauds dans l’appareil. Attendez que les aliments chauds soient refroidis.
Que faire si ... En cas d’anomalie de fonctionnement La fabrication de votre appareil a fait l’objet de nombreuses vérifications. Cependant, si vous constatez une anomalie de fonctionnement, consultez le tableau ci-dessous avant d’appeler le service après vente. 1 Si aucun de ces défauts n’est observé, il convient de consulter très rapidement le service après vente de votre magasin-vendeur afin d’éviter toute altèration des aliments.
Que faire si ... Symptômes Cause possible Solutions La température est mal réglée. Voir "Réglage de la température". La porte est restée longtemps ouverte. Ne pas laisser la porte ouverte plus longtemps que nécessaire. La température à l’interieur Au cours des dernières 24 du congélateur est trop heures, des quantités chaude. importantes d’aliments Actionnez la touche chauds ou de produits frais FROSTMATIC. ont été placés dans l’appareil.
En cas d’arrêt de fonctionnement Si la panne est de courte durée, il n’y a aucun risque d’altération pour les aliments. Abstenez-vous cependant d’ouvrir la porte. Si la panne doit se prolonger, transférez les produits surgelés et congelés dans un autre congélateur. L’autonomie de fonctionnement de votre appareil est de 30 - 32 heures. Cette durée est sensiblement raccourcie suivant la charge de l’appareil.
Terminologie spécifique • Frigorigène Les liquides qui peuvent servir à produire du froid sont appelés frigorigènes. Leur point d’ébullition est relativement bas, au point que la chaleur des aliments stockés dans l’appareil peut amener le frigorigène à bouillir ou à s’évaporer. • Circuit frigorifique Circuit fermé qui renferme le frigorigène. Le circuit frigorifique se compose principalement d’un évaporateur, d’un compresseur, d’un condenseur et de conduites.
Service Au chapitre «Que faire si ....» sont rassemblées les sources d’anomalie les plus fréquentes, auxquelles vous pouvez remédier vous-même. Si malgré toutes les vérifications, une intervention s’avère nécessaire, le vendeur de votre appareil est le premier habilité à intervenir. A défaut (déménagement de votre part, fermeture du magasin où vous avez effectué l’achat...), veuillez consulter l’Assistance Consommateurs qui vous communiquera alors l’adresse d’un Service Après Vente.
Si vous devez nous contacter AEG Pour tenir nos engagements, nous écoutons les Consommateurs Le SERVICE CONSEIL CONSOMMATEURS AEG est le lien privilégié entre la marque et ses Consommateurs. Il assure en permanence une double mission : satisfaire au mieux vos exigences et tirer parti de cette proximité pour améliorer sans cesse les produits que nous vous proposons.
POUR LES APPAREILS COMMERCIALISES EN FRANCE Garantie Conformément à la Législation en vigueur, votre Vendeur est tenu, lors de l'acte d'achat de votre appareil, de vous communiquer par écrit les conditions de garantie et sa mise en œuvre appliquées sur celui-ci. Sous son entière initiative et responsabilité, votre Vendeur répondra à toutes vos questions concernant l'achat de votre appareil et les garanties qui y sont attachées. N'hésitez pas à le contacter. Electrolux Home Products France S.A.S.
From the Electrolux Group. The world´s No.1 choice. "Le Groupe Electrolux est le premier fabricant mondial d'appareils de cuisine, d'entretien et d'extérieur. Plus de 55 millions de produits du Groupe Electrolux (tels que réfrigérateurs, cuisinières, lave-linge, aspirateurs, tronçonneuses, tondeuses à gazon) sont vendus chaque année pour un montant d'environ 14 milliards de dollars US dans plus de 150 pays à travers le monde." AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.