User manual

20 818 20 24-00/3

Initial use

0 1. Insert plug into mains socket.

2. Press ON/OFF button.

A warning tone sounds and the red warning light flashes indicating

that the required storage temperature has not yet been reached. The

compressor starts and then runs automatically.

3. Press the WARNING OFF button to switch off the warning tone.

4. Set temperature to -18°C or colder (see section: "Temperature Adjust-

ment").

Important! Wait until the freezer compartment has reached a tempera-

ture of –18 °C, or the red warning light has gone out, before storing

frozen food.

Temperature Adjustment

0 1. Press either the „+“ (WARMER) or „-“ (COLDER) button.

The temperature display switches over and the DESIRED temperature

currently set flashes on the temperature display.

2. To adjust to a warmer temperature, press the „+“ (WARMER) button. To

adjust to a colder temperature, press the „-“ (COLDER) button. The

changed setting is immediately displayed on the temperature display.

Each time one of the two buttons is pressed again the DESIRED temper-

ature is adjusted by 1 °C.

Temperature range that can be set: -15 °C to -24 °C.

Note: From a food safety point of view, -18 °C for the freezer compart-

ment should be considered cold enough as a storage temperature.

If the buttons are not pressed again for approx. 5 seconds the tempera-

ture display will change from the DESIRED temperature to the ACTUAL

temperature. The display changes from flashing to illuminated num-

bers.

Important! Please check red warning display and temperature display

regularly to assure maintenance of the storage temperature.