User manual

Reversing the door
818 22 86-01/6 13
4. Unscrew Phillips screw from the
door bottom right and remove
door fitting (1). Insert door fitting
supplied in the door bottom left
and fasten with Phillips screw (2).
Carefully remove the door to the
front and place on one side.
5. Move the upper hinge bracket
pivot to the left.
6. Carefully slide the door onto the
top hinge bracket pivot and close.
7. Place the lower door hinge
bracket with the hinge bracket
pivot in the lower left of the door
and fasten.
8. Move the door handle from the
left to the right and cover the
remaining holes with the hole
cover pins attached.
9. Open the door and fit the plinth
cover.