User manual

124 818 33 53-00/5

Attention! If you are using the appliance as a freezing unit: Please wait

prior to putting the foodstuff to be frozen, until the freezer interior

temperature has attained -18 °C, or until the red warning display goes

off.

Attention! If you are using this appliance as a cooling unit, after it has

been used as a freezing unit: Please wait until the temperature has

reached 0 °C before putting the foodstuff to be cooled in the appliance.

Temperature Adjustment

0 1. Press either the „+“ (WARMER) or „-“ (COLDER) button.

The temperature display switches over and the DESIRED temperature

currently set flashes on the temperature display.

2. To adjust to a warmer temperature, press the „+“ (WARMER) button. To

adjust to a colder temperature, press the „-“ (COLDER) button. The

changed setting is immediately displayed on the temperature display.

Each time one of the two buttons is pressed again the DESIRED temper-

ature is adjusted by 1 °C.

The following DESIRED temperature settings are possible:

• Operating mode "Freezing": from -15 °C up to -24 °C in 1 °C steps;

• Operation mode "Cooling": from 0 °C up to 16 °C in 1 °C steps;

Note: From a food safety point of view, -18 °C for the freezer compart-

ment should be considered cold enough as a storage temperature.

If the buttons are not pressed again the temperature display will

change after approx. 5 seconds from the DESIRED temperature to the

ACTUAL temperature. The display changes from flashing to illuminated

numbers.

Important! Please check red warning display and temperature display

regularly to assure maintenance of the storage temperature.