User manual

It is possible to change the button sound
volume by pressing Mode and the
temperature colder buttons together for
a few seconds. Change is reversible.
Display
A
BC
D
E
F
A) MinuteMinder function
B) Timer
C) Temperature indicator
D) Alarm indicator
E) FROSTMATIC function
F) ChildLock function
4.2 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off.
The alarm buzzer could operate after few
seconds.
The temperature indicators show the set
default temperature.
To reset the alarm refer to "High
temperature alarm".
To select a different set temperature
refer to "Temperature regulation".
If "dEMo" appears on the display, refer
to "What to do if..." chapter.
If the door remains open for
some minutes, the light will
turn off automatically. The
light is reset by closing and
opening the door itself.
4.3 Switching off
1. Press the appliance ON/OFF button
for a few seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.
4.4 Temperature regulation
The set temperature of the freezer may
be adjusted by pressing the temperature
button.
Default temperature:
• -18°C for the freezer
The temperature indicator shows the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
4.5 High temperature alarm
An increase in the temperature in the
freezer compartment (for example due to
an earlier power failure) is indicated by:
• a flashing of the alarm and freezer
temperature indicators;
• a sounding of the buzzer.
Press any button to reset the alarm.
The buzzer switches off.
The freezer temperature indicator shows
the highest temperature reached for a
few seconds. Then show again the set
temperature.
The alarm indicator continues to flash
until the normal conditions are restored.
ENGLISH
7