EN IT User Manual Freezer Istruzioni per l’uso Congelatore 2 14 A82700GNX0 A82700GNW0
www.aeg.com CONTENTS 1. SAFETY INFORMATION...........................................................................................3 2. SAFETY INSTRUCTIONS.......................................................................................... 4 3. OPERATION.............................................................................................................. 6 4. DAILY USE..................................................................................................................8 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.aeg.com • • • • Do not use water spray and steam to clean the appliance. Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. 2.
ENGLISH • Do not change the specification of this appliance. • Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer. • Be careful not to cause damage to the refrigerant circuit. It contains isobutane (R600a), a natural gas with a high level of environmental compatibility. This gas is flammable. • If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
www.aeg.com 3. OPERATION 3.1 Control panel 1 2 7 3 6 4 5 Display 1 ON/OFF button 2 Alarm reset button 3 OK button 4 Temperature warmer button 5 Display 6 Temperature colder button 7 Mode button It is possible to change the button sound volume by pressing Mode and the temperature colder buttons together for a few seconds. Change is reversible. A. B. C. D. E. F. A MinuteMinder function Timer Temperature indicator Alarm indicator FROSTMATIC function ChildLock function F E D C B 3.
ENGLISH 3.4 Temperature regulation 3.7 Door open alarm The set temperature of the freezer may be adjusted by pressing the temperature button. Default temperature: • -18°C for the freezer The temperature indicator shows the set temperature. An acoustic alarm will sound if the door is left open for a few minutes. The door open alarm conditions are indicated by: The set temperature will be reached within 24 hours. After a power failure the set temperature remains stored.
www.aeg.com 1. Press Mode until the corresponding icon appears. The ChildLock indicator flashes. 2. Press OK to confirm. The ChildLock indicator is shown. To deactivate the ChildLock function, repeat the procedure until the ChildLock indicator goes off. 4. DAILY USE WARNING! Refer to Safety chapters. 4.
ENGLISH to remove the typical smell of a brandnew product, then dried thoroughly. CAUTION! Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish. 5.2 Periodic cleaning CAUTION! Do not pull, move or damage any pipes and/or cables inside the cabinet. CAUTION! Take care of not to damage the cooling system. CAUTION! When moving the cabinet, lift it by the front edge to avoid scratching the floor. The equipment has to be cleaned regularly: 1.
www.aeg.com Problem Possible cause Solution The lamp does not work. The lamp is defective. Contact the nearest Authorised Service Centre. The compressor operates continually. Temperature is set incorrectly. Refer to "Operation"/"Control panel" chapter. Many food products were put in at the same time. Wait a few hours and then check the temperature again. The room temperature is too high. Refer to climate class chart on the rating plate. Food products placed in the appliance were too warm.
ENGLISH 11 Problem Possible cause Solution Side panels of the appliance are warm. This is a normal state caused by operation of the heat exchanger. Make sure that there is at least 30 mm of space between each side of the appliance and the surrounding furniture when the ambient temperature exceeds 38°C. Door does not open easily. You attempted to re-open the door immediately after closing. Wait a few seconds between closing and re-opening of the door.
www.aeg.com 7.4 Rear spacers 100 mm min 12 You can find the two spacers in the bag with documentation. 1. 2. 3. 4. Release the screw. Engage the spacer below the screw. Turn the spacer to the right position. Tighten again the screws. B 2 20 mm A 1 4 CAUTION! In order to guarantee proper functioning in ambient temperature above 38°C, it is advised to have a 30mm separation between the sides of the appliance and surrounding furniture. 7.
ENGLISH Voltage 230 - 240 V Frequency 50 Hz 13 The technical information is situated in the rating plate, on the external or internal side of the appliance and in the energy label. 9. ENVIRONMENTAL CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste.
www.aeg.com INDICE 1. INFORMAZIONI DI SICUREZZA............................................................................ 15 2. ISTRUZIONI DI SICUREZZA....................................................................................16 3. USO DELL'APPARECCHIATURA........................................................................... 18 4. UTILIZZO QUOTIDIANO........................................................................................ 20 5. PULIZIA E CURA..............................
ITALIANO 1. 15 INFORMAZIONI DI SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. I produttori non sono responsabili di eventuali lesioni o danni derivanti da un'installazione o un uso scorretti. Conservare sempre le istruzioni in un luogo sicuro e accessibile per poterle consultare in futuro. 1.
www.aeg.com • • • • • • • Non usare dispositivi elettrici o altri mezzi artificiali non raccomandati dal produttore allo scopo di accelerare il processo di sbrinamento. Non danneggiare il circuito refrigerante. Non utilizzare apparecchiature elettriche all'interno dei comparti di conservazione degli alimenti, ad eccezione di quelli consigliati dal costruttore. Non nebulizzare acqua né utilizzare vapore per pulire l'apparecchiatura. Pulire l'apparecchiatura con un panno inumidito e morbido.
ITALIANO 2.2 Collegamento elettrico AVVERTENZA! Rischio di incendio e scossa elettrica. • L'apparecchiatura deve disporre di una messa a terra. • Verificare che i dati elettrici riportati sulla targhetta dei dati corrispondano a quelli dell'impianto. In caso contrario, contattare un elettricista. • Utilizzare sempre una presa elettrica con contatto di protezione correttamente installata. • Non utilizzare prese multiple e prolunghe. • Accertarsi di non danneggiare i componenti elettrici (ad es.
www.aeg.com sbrinamento sul fondo dell'apparecchiatura. 2.6 Smaltimento AVVERTENZA! Rischio di lesioni o soffocamento. • Staccare la spina dall'alimentazione elettrica. • Tagliare il cavo di rete e smaltirlo. • Rimuovere la porta per evitare che bambini e animali domestici rimangano chiusi all’interno dell’apparecchiatura. • Il circuito refrigerante e i materiali di isolamento di questa apparecchiatura rispettano l'ozono. • La schiuma isolante contiene gas infiammabili.
ITALIANO 3.2 Accensione 1. Inserire la spina nella presa di alimentazione. 2. Premere il tasto ON/OFF dell'apparecchiatura se il display è spento. Il segnale acustico d'allarme potrebbe attivarsi dopo alcuni secondi. Gli indicatori di temperatura visualizzano la temperatura impostata predefinita. Per resettare l'allarme, fare riferimento alla sezione "Allarme di alta temperatura". Per selezionare una temperatura diversa, fare riferimento alla sezione "Regolazione della temperatura".
www.aeg.com quando una pietanza richiede il raffreddamento di un alimento per un certo periodo di tempo. È utile anche quando è necessario un promemoria per non dimenticare le bottiglie sistemate nel congelatore per un rapido raffreddamento. 1. Premere Mode finché non appare l'icona corrispondente. La spia MinuteMinder lampeggia. Il timer visualizza il valore impostato (30 minuti) per alcuni secondi. 2.
ITALIANO Per congelare alimenti freschi, attivare la funzione FROSTMATIC almeno 24 ore prima di introdurli nel vano congelatore. Riporre i cibi freschi da congelare nei due scomparti superiori. La quantità massima di alimenti congelabile in 24 ore è riportata sulla targhetta dei dati, un’etichetta presente sulle pareti interne dell’apparecchiatura. Il processo di congelamento dura 24 ore: non aggiungere altri alimenti da congelare per tutta la durata del processo.
www.aeg.com 5.4 Periodi di non utilizzo Se l'apparecchiatura non viene utilizzata per un lungo periodo, adottare le seguenti precauzioni: 1. Scollegare l'apparecchiatura dalla rete elettrica. 2. Estrarre tutti gli alimenti. 3. Pulire l'apparecchiatura e tutti gli accessori. 4. Lasciare la porta/le porte socchiusa/e per evitare la formazione di odori sgradevoli. 6. RISOLUZIONE DEI PROBLEMI AVVERTENZA! Fare riferimento ai capitoli sulla sicurezza. 6.1 Cosa fare se...
ITALIANO Problema Causa possibile 23 Soluzione Il compressore non si avvia Ciò è normale, non si è veimmediatamente dopo ave- rificato alcun errore. re premuto il tastoFROSTMATIC, oppure dopo avere cambiato la temperatura. Il compressore si avvia dopo un certo intervallo. Presenza di acqua sul pavimento. L'acqua di sbrinamento non Collegare lo scarico dell'acqua viene scaricata nella bacidi sbrinamento alla bacinella nella di evaporazione posta di evaporazione. sopra il compressore.
www.aeg.com Solo al Centro di Assistenza è permesso sostituire l'impianto d'illuminazione. Contattare un Centro Assistenza autorizzato. AVVERTENZA! Fare riferimento ai capitoli sulla sicurezza. 100 mm min 7. INSTALLAZIONE 7.1 Luogo d'installazione Classe climatica Temperatura ambiente SN Da +10°C a + 32°C N Da +16°C a + 32°C ST Da +16°C a + 38°C T Da +16°C a + 43°C 7.
ITALIANO 7.4 Distanziatori posteriori Nel sacchetto contenente la documentazione sono presenti due distanziatori. 1. Svitare la vite. 2. Sistemare il distanziatore al di sotto della vite. 3. Ruotare il distanziatore verso destra. 4. Serrare nuovamente le viti. 2 1 4 25 • L'apparecchiatura deve disporre di una messa a terra. La spina del cavo di alimentazione è dotata di un apposito contatto.
www.aeg.
ITALIANO 27
0156329-A-362016 www.aeg.