Instruction manual

34
ENGLISH
Rating (Child protection)
Some DVD contain information concerning the target
group. This method is comparable with the rating of
cinema lms (“Suitable only for persons of 12 years and
over” e.g.).
If you have the child protection option activated a prob-
ably existing corresponding information is read from the
DVD and compared with the value pre-set by you. If a
DVD is intended for an older age group than the one pre-
set by you, the DVD cannot be played. You can select the
following options for child protection after unlocking the
password protection:
• Kid Safe: Suitable for children.
• G:Suitable for all age groups.
• PG:The presence of parents is recommended. Some
scenes may be unsuitable for children.
• PG13:The presence of parents is strictly recommend-
ed. Some scenes may be unsuitable for children under
the age of 13.
• PGR:The presence of parents is strictly necessary.
• R:Young persons under the age of 17 may only view
this lm in the presence of an adult.
• NC17:Children and juveniles under the age of 17 are
not allowed to watch this lm.
• Adult:The lm must only be watched by adults.
Factory setting
Select the command “Default/Restore” if you want to re-
set the player to the factory implemented default settings.
Any settings you have made will be lost.
Language Settings
You can make various language settings here:
• OSD language: Here you can select the language of
the onscreen displays.
• Audiolanguage: Here you can select the preferred
language for the audio output.
• Subtitlelanguage:Here you can select the preferred
language for the subtitles accompanying the lm.
• Menulanguage:Here you can select the preferred
language for the DVD menus.
Video Settings
You can make various settings to adjust the video signal.
• Brightness
• Contrast
• Hue(NTSC only)
• Saturation
• Sharpness
Speaker setup
Downmix
Change the characteristics of the speaker output:
• LT/RT: Choose this setting if you want to play the DVD
withtheProLogicDolbystereoeect.Thisproducesa
almostreal2-channelreplayeect.
• Stereo: Choose this setting if you want to play a
DVD,that has been produced in the 5.1-Audio format,
as 2-channel stereo sound.
• VSS: Use this setting to simulate surround playback.
Digital setup
Dynamic Range