Operation Manual

English
53
AR4030BT-USB-CR_IM 05.07.16
Safety advice
WARNING:
Follow the safety instructions below to prevent hazards and
damage to property:
• Repairs to electrical devices may only be carried out
by qualified persons who have been trained by the
manufacturer. Significant risks for the user and damage
to the unit may arise from faulty repairs.
Fault Causes and Troubleshooting
Before sending the unit to our customer services, use the
following table to check whether you can repair the fault
yourself.
Fault Potential Cause Solution
Cannot switch
on the unit.
The ignition is not
turned on.
Turn the key to start
the ignition.
No sound The volume is set at
the minimum level.
Increase the volume.
The cable is not
connected properly.
Check the cable
connections.
Function
button does
not work.
There is a fault on
the unit.
Press the RESET
button (8).
Radio and / or
the automatic
station preset
does not work
The antenna cable
is not connected
properly
Check that the
antenna is connect
-
ed securely.
The transmitter
signals are too
weak
Manually tune the
stations.
Manually tune
the stations.
Connection 4 in the
ISO connection A
(permanent posi
-
tive) is not properly
connected.
Check the cable
connections. To
do so, refer to the
“Connection“
chapter
Unit does not
work on the
USB port.
The USB port
is designed for
devices which work
according to the
USB standard. Not
all devices on the
market conform
to this standard. A
device which does
not function ac-
cording to the USB
standard may have
been connected.
Connect a device
which works
according to the
USB standard.
Ensure that the data
storage device is
formatted with the
FAT32 file system.
Fault Potential Cause Solution
SD memory
card does not
work.
The device is not
reading the card.
Check the card.
Ensure that the data
storage device is
formatted with the
FAT32 file system.
A connection
cannot be
established
via Bluetooth.
Bluetooth is turned
off on your mobile
phone.
Activate Bluetooth
in your mobile
phone.
Technical Data
Model: ............................................................ AR 4030 BT/USB/CR
General
Supply voltage .................................... DC 12 V (negative ground)
Power consumption............................................................5 A Max.
Power ......................................................................4 x 40 W (PMPO)
Playable file formats ...................................................... MP3, WMA
Net weight ............................................................... approx. 0.45 kg
Housing dimensions (Installation) .............. 182 W x 52 H x 110 D
FM Band
Frequency range ........................................87.5 MHz ~ 108.0 MHz
Effective sensitivity ...................................................................10 dB
I.F. frequency ...................................................................... 10.7 MHz
Bluetooth
Bluetooth support ...................................................................... V 2.0
Range .....................................................................approx. 8 metres
Transmission frequency ..................................... 2.402 − 2.480 GHz
Protocols ....................................................................A2DP / AVRCP
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device complies with all current CE directives, such as
electromagnetic compatibility and low voltage directive and
is manufactured according to the latest safety regulations.
Disposal
Meaning of the “Wheelie Bin” Symbol
Take care of our environment, do not dispose of
electrical appliances via the household waste.
Dispose of obsolete or defective electrical
appliances via municipal collection points.
Please help to avoid potential environmental
and health impacts through improper waste disposal.
You contribute to recycling and other forms of utilization of
old electric and electronic appliances.
Your municipality provides you with information about col
-
lecting points.