User manual

What to do if ...
68
Replace light bulb
1
Warning! Danger of electrical shock! Before replacing the light bulb
switch appliance off and remove the mains plug, or switch off or turn
out the circuit breaker or fuse.
Light bulb specifications: 220-240 V, max. 15 W, socket: E 14
0 To switch the appliance off press
and hold the ON/OFF button for
about 5 seconds.
0 Remove mains plug.
0 Replace defective light bulb. The
lamp is situated beneath the
operating panel and when the
door is opened it becomes
accessible from the bottom.
Adjust door contacter
If, for example, the illumination is not automatically switched off when
the door is closed, or if the "Open Door" warning signal sounds, the
contacter at the top of the door may need to be readjusted.
0 Loosen phillips head screw and push
contacter towards the inner side of
the door.
0 Re-tighten phillips head screw.
0 Please check,
– if illumination is switched off
when the door is closed
and
– if the audible warning signal
sounds after the door has been
open for about 80 seconds.
If not, readjust contacter again.