User manual

Installation and Connection
74
Re-Hanging Door
The side at which the door opens can be changed from the right side
(factory adjustment) to the left side, if the installation site requires.
1
Warning! When changing the side at which the door opens, the
appliance may not be connected to the mains. Remove plug from the
mains beforehand.
0 Lay the left side of the appliance
onto a soft pad, e.g. rug, blanket
etc.
0 Turn pivot pin out of lower door
pivot.
Keep the spacing washer bet-
ween the door and the bearing.
0 Romove door carefully and set
aside.
0 Turn the 4 phillips head screws
out of the base and remove the
base.
0 Overturn the plinth’s blind
bearing from left to the right.
0 Unscrew the door bearing and
transfer it to the left.