ATC1600 DE Benutzerinformation FR Notice d'utilisation IT Istruzioni per l’uso EN User manual 2 19 36 52
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BETRIEB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ERSTE INBETRIEBNAHME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 TÄGLICHER GEBRAUCH . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie zu Ihrer Sicherheit und für eine optimale Nutzung des Geräts vor der Montage und dem ersten Gebrauch das vorliegende Benutzerhandbuch einschließlich der Ratschläge und Warnungen aufmerksam durch. Es ist wichtig, dass zur Vermeidung von Fehlern und Unfällen alle Personen, die das Gerät benutzen, mit der Bedienung und den Sicherheitsvorschriften vertraut sind.
www.aeg.com Bei einer eventuellen Beschädigung des Kältekreislaufs: – Offene Flammen und Zündfunken vermeiden – Den Raum, in dem das Gerät installiert ist, gut lüften • Technische und anderweitige Änderungen am Gerät sind gefährlich. Ein defektes Netzkabel kann Kurzschlüsse und einen Brand verursachen und/ oder zu Stromschlägen führen. WARNUNG! Elektrische Bauteile (Netzkabel, Stecker, Kompressor) dürfen zur Vermeidung von Gefahren nur vom Kundendienst oder einer Fachkraft ausgewechselt werden.
DEUTSCH • Das Gerät darf nicht in der Nähe von Heizkörpern oder Kochern installiert werden. • Vergewissern Sie sich, dass der Netzstecker des Gerätes nach der Installation frei zugänglich ist. • Wenn ein Wasseranschluss vorgesehen ist, verbinden Sie das Gerät nur mit dem Trinkwasseranschluss. 1.6 Kundendienst • Sollte die Wartung des Gerätes elektrische Arbeiten verlangen, so dürfen diese nur von einem qualifizierten Elektriker oder einem Elektro-Fachmann durchgeführt werden.
www.aeg.com 3. ERSTE INBETRIEBNAHME Verwenden Sie keine aggressiven Reinigungsmittel oder Scheuerpulver, die die Oberfläche beschädigen. 3.1 Reinigung des Innenraums Bevor Sie das Gerät in Betrieb nehmen, beseitigen Sie den typischen „Neugeruch“ am besten durch Reinigen der Innenteile mit lauwarmem Wasser und einer neutralen Seife. Sorgfältig nachtrocknen. 4. TÄGLICHER GEBRAUCH 4.
DEUTSCH Geräusch vom Kompressor. Das ist normal. • Die thermische Ausdehnung kann ein plötzliches Krachen verursachen. Das ist eine natürliche und nicht gefährliche physikalische Erscheinung. Das ist normal. • Beim Ein- oder Ausschalten des Kompressors ist ein leises "Klicken" des Temperaturreglers zu hören. Das ist normal. 5.2 Energiespartipps • Öffnen Sie die Tür nicht zu häufig, und lassen Sie diese nicht länger offen als unbedingt notwendig.
www.aeg.com • Spülen und trocknen Sie diese sorgfältig ab. Ziehen Sie nicht an Leitungen und/oder Kabeln im Innern des Kühlschranks und achten Sie darauf, diese nicht zu verschieben oder zu beschädigen. Benutzen Sie zur Reinigung des Innenraums keinesfalls Putzmittel, Scheuerpulver, stark parfümierte Reinigungsmittel oder Wachspolituren, da diese die Oberfläche des Innenraums beschädigen und einen starken Eigengeruch hinterlassen können.
DEUTSCH 9 7. WAS TUN, WENN … WARNUNG! Ziehen Sie vor der Fehlersuche immer den Netzstecker aus der Steckdose. Die Fehlersuche, die in der vorliegenden Gebrauchsanweisung nicht beschrieben ist, darf nur von einem qualifizierten Elektriker oder einer kompetenten Person durchgeführt werden. Störung Während das Gerät in Betrieb ist, entstehen bestimmte Geräusche (Kompressor und Kühlkreislauf). Mögliche Ursache Abhilfe Das Gerät ist zu laut.
www.aeg.com Störung Mögliche Ursache Abhilfe Wasser fließt an der Rückwand des Kühlschranks hinunter. Beim automatischen Abtauen fließt das abgetaute Wasser an der Rückwand des Kühlschranks hinunter. Das ist normal. Wasser fließt in den Kühlschrank. Der Wasserablauf ist verstopft. Reinigen Sie den Ablauf. Die eingelagerten Lebensmittel verhindern, dass das Wasser zum Wasserablauf fließt. Stellen Sie sicher, dass die Lebensmittel nicht die Rückwand berühren. Wasser fließt auf den Boden.
DEUTSCH 11 7.1 Ersetzen der Lampe 1. 2. 3. 4. 5. 6. 7. 8. 3. 7.2 Schließen der Tür 1. 2. Reinigen Sie die Türdichtungen. Stellen Sie die Tür nach Bedarf ein. Siehe hierzu „Montage“. Ziehen Sie den Netzstecker aus der Netzsteckdose. Lösen Sie die Schraube an der Lampenabdeckung. Nehmen Sie die Lampenabdeckung ab (siehe hierzu die Abbildung). Ersetzen Sie die defekte Lampe durch eine Lampe mit der gleichen Leistung, die speziell für Haushaltsgeräte vorgesehen ist.
www.aeg.com 9. MONTAGE WARNUNG! Lesen Sie bitte die "Sicherheitshinweise" sorgfältig vor der Aufstellung des Geräts durch, um Gefahren für Sie selbst zu vermeiden und einen korrekten Betrieb des Geräts zu gewährleisten. 9.
DEUTSCH 13 9.3 Standort 100 mm 15 mm 15 mm Das Gerät sollte in ausreichendem Abstand von Wärmequellen wie Heizungen, Boilern, direkter Sonneneinstrahlung, usw. aufgestellt werden. Vergewissern Sie sich, dass Luft an der Rückseite des Gehäuses frei zirkulieren kann. Wenn das Gerät unter einem Hängeschrank installiert wird, muss der Abstand zwischen der Geräteoberseite und dem Hängeschrank mindestens 100 mm betragen, um die bestmögliche Leistung zu garantieren.
www.aeg.com 9.5 Abnehmen der Arbeitsplatte 3 1 2 4 Bauen Sie die Arbeitsplatte wie folgt aus: • Die Schrauben rechts und links auf der Vorderseite lösen. • Die Schrauben rechts und links auf der Rückseite lösen. • Heben Sie die Arbeitsplatte an der Vorderseite leicht an, schieben Sie sie ca. 20 mm zurück und heben Sie sie von der Front ab. • Die Schrauben rechts und links auf der Rückseite lösen. • Bewahren Sie die Schrauben an einem sicheren Ort zusammen mit der Arbeitsplatte auf. 9.
DEUTSCH 15 9.7 Wechsel des Türanschlags Die nachfolgend beschriebenen Tätigkeiten müssen mit Hilfe einer zweiten Person durchgeführt werden, um ein Herunterfallen der Türen zu vermeiden. Beim Wechsel des Türanschlags muss wie folgt vorgegangen werden: • Ziehen Sie den Stecker aus der Steckdose. • Neigen Sie das Gerät vorsichtig nach hinten, so dass der Kompressor nicht den Boden berühren kann. • Schrauben Sie den linken Standfuß ab. • Lösen Sie die Schrauben des unteren Türscharniers.
www.aeg.com 4 1 2 3 • Entfernen Sie den Griff (je nach Ausstattung) und bringen Sie ihn an der gegenüberliegenden Seite an. • Schieben Sie das Gerät wieder an seinen Standort, richten Sie es waagerecht aus und nehmen Sie es mindestens vier Stunden lang nicht in Betrieb. Schließen Sie es dann an die Stromversorgung an. Prüfen Sie alles erneut, um sicherzustellen, dass: • Alle Schrauben fest angezogen sind. • Die Tür korrekt öffnet und schließt. Bei niedrigen Umgebungstemperaturen (z.B.
DEUTSCH 10. GERÄUSCH Während das Gerät in Betrieb ist, entstehen bestimmte Geräusche (Kompressor und Kühlkreislauf).
www.aeg.com BLUBB! BLUBB! CRACK! CRACK! 11. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte. Entsorgen Sie Geräte mit diesem Symbol nicht mit dem Hausmüll. Bringen Sie das Gerät zu Ihrer örtlichen Sammelstelle oder wenden Sie sich an Ihr Gemeindeamt.
FRANÇAIS 19 SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FONCTIONNEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PREMIÈRE UTILISATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UTILISATION QUOTIDIENNE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. INSTRUCTIONS DE SÉCURITÉ Pour votre sécurité et garantir une utilisation correcte de l'appareil, lisez attentivement cette notice, y compris les conseils et avertissements, avant d'installer et d'utiliser l'appareil pour la première fois. Pour éviter toute erreur ou accident, veillez à ce que toute personne qui utilise l'appareil connaisse bien son fonctionnement et ses fonctions de sécurité. Conservez cette notice avec l'appareil.
FRANÇAIS Si le circuit frigorifique est endommagé : – évitez les flammes vives et toute autre source d'allumage – aérez soigneusement la pièce où se trouve l'appareil • Ne modifiez pas les spécifications de l'appareil. Si le câble d'alimentation est endommagé, il peut causer un court circuit, un incendie et/ou une électrocution. 1.
www.aeg.com • Assurez-vous que la prise murale reste accessible après l'installation de l'appareil. • Branchez à l'alimentation en eau potable uniquement. (Si un branchement sur le réseau d'eau est prévu.) 1.6 Maintenance • Les branchements électriques nécessaires à l'entretien de l'appareil doivent être réalisés par un électricien qualifié ou une personne compétente. • Cet appareil ne doit être entretenu et réparé que par un Service après-vente autorisé, exclusivement avec des pièces d'origine.
FRANÇAIS 23 3. PREMIÈRE UTILISATION N'utilisez pas de produits abrasifs, poudre à récurer, éponge métallique pour ne pas abîmer la finition. 3.1 Nettoyage intérieur Avant d'utiliser l'appareil pour la première fois, nettoyez l'intérieur et tous les accessoires internes avec de l'eau tiède savonneuse pour supprimer l'odeur caractéristique du "neuf" puis séchez soigneusement. 4. UTILISATION QUOTIDIENNE 4.
www.aeg.com • Le compresseur peut produire un ronronnement aigu ou un bruit de pulsation. Ce phénomène est normal. • La dilatation thermique peut provoquer un soudain, léger bruit de craquement. C'est un phénomène normal et sans gravité. Ce phénomène est normal. • Un léger claquement se produit lors de la mise en fonctionnement/à l'arrêt du compresseur. Ce phénomène est normal. 5.2 Conseils pour l'économie d'énergie • N'ouvrez pas la porte trop souvent ou plus longtemps que nécessaire.
FRANÇAIS Ne pas tirer, déplacer ou endommager les tuyaux et/ou câbles qui se trouvent à l'intérieur de l'appareil. Ne JAMAIS utiliser de produits abrasifs ou caustiques ni d'éponges avec grattoir pour nettoyer l'intérieur de façon à ne pas l'abîmer et laisser de fortes odeurs. Nettoyer le condenseur (grille noire) et le compresseur situés à l'arrière de l'appareil avec une brosse ou un aspirateur. Cette opération améliore les performances de l'appareil et permet des économies d'énergie.
www.aeg.com 7. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT Avant d'intervenir sur l'appareil, débranchez-le. La résolution des problèmes non mentionnés dans la présente notice, doit être exclusivement confiée à un électricien qualifié ou à une personne compétente. Certains bruits pendant le fonctionnement (compresseur, circuit de réfrigérant) sont normaux. Symptôme Cause possible Solution L'appareil est bruyant. L'appareil n'est pas stable.
FRANÇAIS 27 Symptôme Cause possible Solution De l'eau s'écoule dans le réfrigérateur. L'orifice d'évacuation de l'eau est obstrué. Nettoyez l'orifice. Des denrées empêchent l'eau de s'écouler dans le réservoir d'eau. Assurez-vous que les produits ne touchent pas l'évaporateur. De l'eau coule sur le sol. L'eau de dégivrage ne s'écoule pas dans le plateau d'évaporation situé au-dessus du compresseur. Fixez le tuyau de sortie de l'eau au plateau d'évaporation.
www.aeg.com 7.1 Remplacement de l'ampoule d'éclairage 1. 2. 3. 4. 5. 6. 7. 8. 7.2 Fermeture de la porte 1. 2. Nettoyez les joints de la porte. Si nécessaire, ajustez la porte. Reportez-vous au chapitre « Installation ». 3. Débranchez l'appareil de la prise secteur. Retirez la vis du diffuseur. Retirez le diffuseur (voir l'illustration). Remplacez l'ampoule défectueuse par une ampoule neuve de puissance identique, spécifiquement conçue pour les appareils électroménagers.
FRANÇAIS matique (indiquée sur la plaque signalétique) pour lequel il est prévu. Au delà de ces températures, ses performances peuvent s'en trouver diminuées : les différentes classes climatiques existantes et les températures ambiantes correspondantes en fonction du modèle de l'appareil sont les suivantes : 29 Classe Température ambiante climatique SN +10 °C à +32 °C N +16 °C à +32 °C ST +16 °C à +38 °C T +16 °C à +43 °C 9.
www.aeg.com 9.4 Encastrement sous un plan de travail continu 200 cm 2 93-103 mm A 105 mm 570 mm 550 mm min. 820 mm 500/550/600 mm Si votre réfrigérateur est installé sous un plan de travail continu, une ouverture de sortie d'air d'au moins 200 cm2 et une grille de ventilation correspondant à la conception du plan de travail doivent être installées à l'arrière du plan de travail. La surface de coupe du plan de travail doit être vernie pour éviter tout gonflement dû à la pénétration de l'humidité.
FRANÇAIS 31 9.6 Installation et fixation à un plan de travail continu Avant le montage, modifiez le sens d'ouverture de la porte au besoin (consultez la section Réversibilité de la porte). • Encastrez l'appareil dans la niche. • Assurez-vous que le câble d'alimentation n'est pas coincé. • Vérifiez la distance du mur (voir : Installation sous un plan de travail continu).
www.aeg.com • Dévissez la goupille de la charnière de porte supérieure de l'appareil puis revissez-la de l'autre côté. • Retirez la charnière inférieure. Placez la goupille dans le sens de la flèche. • Installez la porte de l'appareil sur la goupille de la charnière de porte supérieure. • Dévissez et installez la vis sur le côté opposé. • Installez la charnière inférieure du côté opposé sans changer la position de la porte. • Vissez la vis à l'emplacement libéré de l'autre côté, ainsi que le pied droit.
FRANÇAIS 33 9.8 Prise de courant ATTENTION Assurez-vous que le câble d'alimentation n'est pas coincé. La prise de courant nécessaire pour le branchement de votre appareil à l'alimentation électrique doit être positionnée de sorte qu'il est possible de retirer la fiche de l'appareil. Si votre appareil est installé sous un plan de travail continu, la prise de courant doit être disponible comme indiqué. 9.
www.aeg.com SSSRRR! HISSS! BLUBB! SSSRRR! HISSS! BLUBB! CLICK! BRRR! CRACK! CLICK! BRRR! CRACK! 11. EN MATIÈRE DE PROTECTION DE L'ENVIRONNEMENT Recyclez les matériaux portant le symbole . Déposez les emballages dans les conteneurs prévus à cet effet. Contribuez à la protection de l'environnement et à votre sécurité, recyclez vos produits électriques et électroniques. Ne jetez pas les appareils portant le symbole avec les ordures ménagères.
FRANÇAIS collecte officiels SENS est disponible sous www.sens.ch.
www.aeg.com INDICE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. ISTRUZIONI DI SICUREZZA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USO DELL'APPARECCHIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRIMO UTILIZZO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UTILIZZO QUOTIDIANO . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ITALIANO 1. 37 ISTRUZIONI DI SICUREZZA Per garantire un impiego corretto e sicuro dell'apparecchio, prima dell'installazione e del primo utilizzo leggere con attenzione il libretto istruzioni, inclusi i suggerimenti e le avvertenze. Per evitare errori e incidenti, è importante garantire che tutte le persone che utilizzano l'apparecchio ne conoscano il funzionamento e le caratteristiche di sicurezza.
www.aeg.com AVVERTENZA! Tutti i componenti elettrici (cavo di alimentazione, spina, compressore) devono essere sostituiti da un tecnico certificato o da personale d'assistenza qualificato al fine di evitare di correre rischi. 1. • • • • Non collegare prolunghe al cavo di alimentazione. 2. Evitare che il lato posteriore dell'apparecchiatura possa schiacciare o danneggiare la spina, causandone il surriscaldamento con un conseguente rischio di incendio. 3.
ITALIANO 1.6 Assistenza tecnica • Gli interventi elettrici sull'apparecchiatura devono essere eseguiti esclusivamente da elettricisti qualificati o da personale competente. • Gli interventi di assistenza devono essere eseguiti esclusivamente da tecnici autorizzati e utilizzando solo ricambi originali. 1.7 Tutela ambientale Questo apparecchio non contiene gas che potrebbero danneggiare lo strato di ozono nel circui- 39 to refrigerante o nei materiali isolanti.
www.aeg.com Non usare detergenti corrosivi o polveri abrasive che danneggiano le finiture. 4. UTILIZZO QUOTIDIANO 4.1 Ripiani rimovibili Le guide presenti sulle pareti del frigorifero permettono di posizionare i ripiani a diverse altezze. 4.2 Posizionamento dei ripiani della porta Per facilitare l'introduzione di alimenti di diverse dimensioni, i ripiani della porta possono essere posizionati ad altezze differenti.
ITALIANO 41 5.2 Consigli per il risparmio energetico 5.4 Consigli per la refrigerazione • Non aprire frequentemente la porta e non lasciarla aperta più di quanto assolutamente necessario. • Se la temperatura ambiente è elevata, il termostato è impostato su una regolazione alta e l'apparecchio è a pieno carico, il compressore può funzionare in continuo causando la formazione di brina o ghiaccio sull'evaporatore.
www.aeg.com Molti detergenti per cucine di marca contengono sostanze chimiche in grado di attaccare/danneggiare la plastica impiegata in questo apparecchio. Per questo motivo si raccomanda di pulire l'involucro esterno dell'apparecchio solo con acqua calda con un po' di liquido detergente. Dopo la pulizia, ricollegare l'apparecchio alla rete di alimentazione. 6.
ITALIANO Problema Possibile causa 43 Soluzione La spina non è inserita Inserire correttamente la correttamente nella presa spina nella presa. di alimentazione. La lampadina non si accende. Il compressore rimane sempre in funzione. L'apparecchiatura non riceve corrente. Non arriva tensione alla presa elettrica. Collegare alla presa un'altra apparecchiatura elettrica. Rivolgersi a un elettricista qualificato. La lampadina è in standby. Chiudere e riaprire la porta. La lampadina è difettosa.
www.aeg.com Problema Possibile causa Soluzione La temperatura all'interno dell'apparecchiatura è troppo alta. La temperatura non è regolata correttamente. Impostare una temperatura inferiore. La porta non è chiusa cor- Vedere "Chiusura della rettamente. porta". La temperatura nel vano frigorifero è troppo alta. La temperatura degli alimenti è troppo alta. Prima di introdurre gli alimenti, lasciarli raffreddare a temperatura ambiente. Sono stati introdotti molti alimenti insieme.
ITALIANO 45 8. DATI TECNICI Dimensioni Altezza 850 mm Larghezza 595 mm Profondità 635 mm Tensione 230 V Frequenza I dati tecnici sono riportati sulla targhetta del modello, applicata sul lato sinistro 50 Hz interno dell'apparecchiatura, e sull'etichetta dei valori energetici. 9. INSTALLAZIONE AVVERTENZA! Leggere con attenzione le "Informazioni per la sicurezza" per la vostra sicurezza e per il corretto funzionamento dell'apparecchio prima di procedere all'installazione. 9.
www.aeg.com 9.3 Posizione 100 mm 15 mm 15 mm L'apparecchiatura deve essere installata lontano da fonti di calore come per esempio termosifoni, boiler, luce solare diretta, ecc.. Verificare che sul lato posteriore sia garantita un'adeguata circolazione dell'aria. Per ottenere prestazioni ottimali, se l'apparecchiatura è installata sotto un pensile, si raccomanda di mantenere una distanza minima di 100 mm tra quest'ultimo e lo spigolo superiore dell'apparecchiatura.
ITALIANO 47 9.5 Rimozione del piano di lavoro 3 1 2 4 Per rimuovere il piano di lavoro, procedere come indicato di seguito: • Svitare la vite sinistra e quella destra sulla parte anteriore. • Svitare la vite destra e sinistra sulla parte posteriore. • Sollevare leggermente il piano di lavoro nella zona anteriore, spingerlo indietro di circa 20 mm e sollevarlo anteriormente. • Svitare la vite destra e sinistra sulla parte posteriore. • Conservare le viti in un luogo sicuro insieme al piano di lavoro.
www.aeg.com 9.7 Reversibilità della porta Per effettuare le seguenti operazioni, si raccomanda di farsi aiutare da un'altra persona che tenga ben ferme le porte dell'apparecchiatura. Per modificare il senso di apertura della porta, procedere come segue: • Estrarre la spina dalla presa di alimentazione. • Inclinare l'apparecchiatura verso la parte posteriore facendo in modo che il compressore non tocchi il pavimento. • Svitare il piedino sinistro. • Rimuovere le viti dalla cerniera inferiore della porta.
ITALIANO 49 Se la temperatura ambiente è bassa (ad esempio in inverno), è possibile che la guarnizione non aderisca perfettamente all'apparecchiatura. In tal caso, attendere che aderisca naturalmente. Per chi preferisce non eseguire direttamente le operazioni sopra descritte, consigliamo di rivolgersi al servizio assistenza più vicino. L'intervento di inversione delle porte, eseguito dai tecnici del servizio post-vendita, sarà a carico dell'utente. 9.
www.aeg.
ITALIANO 11. CONSIDERAZIONI AMBIENTALI Riciclare i materiali con il simbolo . Buttare l'imballaggio negli appositi contenitori per il riciclaggio. Aiutare a proteggere l’ambiente e la salute umana e a riciclare rifiuti derivanti da apparecchiature elettriche ed elettroniche. Non smaltire le apparecchiature che riportano il simbolo insieme ai normali rifiuti domestici. Portare il prodotto al punto di riciclaggio più vicino o contattare il comune di residenza.
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DAILY USE . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 53 SAFETY INSTRUCTIONS In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
www.aeg.com WARNING! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel to avoid hazard. 1. • • • • Power cord must not be lengthened. 2. Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable. 5.
ENGLISH 1.7 Environment Protection This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The insulation foam contains flammable 55 gases: the appliance shall be disposed according to the applicable regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchanger.
www.aeg.com 4. DAILY USE 4.1 Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. 4.2 Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at different heights. To make these adjustments proceed as follows: gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required. 5. HELPFUL HINTS AND TIPS 5.
ENGLISH 5.3 Hints for fresh food refrigeration To obtain the best performance: • do not store warm food or evaporating liquids in the refrigerator • do cover or wrap the food, particularly if it has a strong flavour • position food so that air can circulate freely around it 5.4 Hints for refrigeration Useful hints: Meat (all types) : wrap in polythene bags and place on the glass shelf above the vegetable drawer. 57 For safety, store in this way only one or two days at the most.
www.aeg.com Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates. It is important to periodically clean the defrost water drain hole in the middle of the refrigerator compartment channel to prevent the water overflowing and dripping onto the food inside.
ENGLISH 59 Problem Possible cause Solution The lamp does not work. The lamp is in stand-by. Close and open the door. The lamp is defective. Refer to "Replacing the lamp". The temperature is not set correctly. Set a higher temperature. The door is not closed correctly. Refer to "Closing the door". The door has been opened too frequently. Do not keep the door open longer than necessary. The product temperature is too high.
www.aeg.com Problem Possible cause Solution The temperature in the refrigerator is too high. There is no cold air circulation in the appliance. Make sure that there is cold air circulation in the appliance. 7.1 Replacing the lamp 1. 2. 3. 4. 5. 6. 7. 8. 3. 7.2 Closing the door 1. 2. Clean the door gaskets. If necessary, adjust the door. Refer to "Installation". Disconnect the mains plug from the mains socket. Remove the screw from the lamp cover.
ENGLISH 61 9. INSTALLATION WARNING! Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance. the climate class indicated on the rating plate of the appliance: Climate class Ambient temperature 9.
www.aeg.com 9.3 Location 100 mm 15 mm 15 mm The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet.To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, however, the appliance should not be positioned below overhanging wall units.
ENGLISH 63 9.5 Detaching the worktop 3 1 2 4 To remove the worktop, please proceed as follows: • Unscrew left and right screws at the front. • Unscrew left and right screws at the back. • Lift the worktop slightly at the front, push back about 20 mm and lift off from the front. • Unscrew left and right screws at the back. • Store the screws in a safe place together with the worktop. 9.
www.aeg.com 9.7 Door reversibility To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations. To change the opening direction of the door, do these steps: • Remove the plug from the power socket. • Tilt back the appliance carefully so that the compressor cannot touch the floor. • Unscrew the left foot. • Unscrew the screws of the door bottom hinge.
ENGLISH 65 If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket. In case you do not want to carry out the above mentioned operations, contact the nearest After Sales Service Force. The After Sales Service specialist will carry out the reversibility of the doors at your cost. 9.8 Plug socket CAUTION! Make sure that the mains cable can move freely.
www.aeg.
ENGLISH 11. ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
212000278-A-492012 www.aeg.