ATK1371 DE Benutzerinformation FR Notice d'utilisation IT Istruzioni per l’uso EN User manual 2 22 42 61
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BETRIEB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ERSTE INBETRIEBNAHME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 TÄGLICHER GEBRAUCH . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie zu Ihrer Sicherheit und für eine optimale Nutzung des Geräts vor der Montage und dem ersten Gebrauch das vorliegende Benutzerhandbuch einschließlich der Ratschläge und Warnungen aufmerksam durch. Es ist wichtig, dass zur Vermeidung von Fehlern und Unfällen alle Personen, die das Gerät benutzen, mit der Bedienung und den Sicherheitsvorschriften vertraut sind.
www.aeg.com Bei einer eventuellen Beschädigung des Kältekreislaufs: – Offene Flammen und Zündfunken vermeiden – Den Raum, in dem das Gerät installiert ist, gut lüften • Technische und anderweitige Änderungen am Gerät sind gefährlich. Ein defektes Netzkabel kann Kurzschlüsse und einen Brand verursachen und/ oder zu Stromschlägen führen. WARNUNG! Elektrische Bauteile (Netzkabel, Stecker, Kompressor) dürfen zur Vermeidung von Gefahren nur vom Kundendienst oder einer Fachkraft ausgewechselt werden.
DEUTSCH • Kontrollieren Sie nach dem Auspacken das Gerät auf eventuelle Beschädigungen. Nehmen Sie das Gerät nicht in Betrieb, wenn es beschädigt ist. Melden Sie die Schäden umgehend dem Händler, bei dem Sie es erworben haben. Bewahren Sie in diesem Fall die Verpackung auf. • Lassen Sie das Gerät mindestens vier Stunden stehen, bevor Sie es elektrisch anschließen, damit das Öl in den Kompressor zurückfließen kann.
www.aeg.com eine mittlere Einstellung ist im Allgemeinen am besten geeignet. Allerdings muss für eine exakte Einstellung berücksichtigt werden, dass die Temperatur im Innern des Gerätes von verschiedenen Faktoren abhängt: • von der Raumtemperatur • von der Häufigkeit der Türöffnung • von der Menge der eingelagerten Lebensmittel • und vom Standort des Geräts.
DEUTSCH 4.3 Auftauen Tiefgefrorene oder gefrorene Lebensmittel können vor der Verwendung je nach der zur Verfügung stehenden Zeit im Kühlschrank oder bei Raumtemperatur aufgetaut werden. 7 Kleinere Teile können sogar direkt aus dem Gefrierraum entnommen und anschließend sofort gekocht werden. In diesem Fall dauert der Garvorgang etwas länger. 4.
www.aeg.com 5.2 Energiespartipps • Öffnen Sie die Tür nicht zu häufig, und lassen Sie diese nicht länger offen als unbedingt notwendig. • Wenn die Umgebungstemperatur hoch ist und der Temperaturregler auf eine niedrige Temperatur eingestellt und das Gerät voll beladen ist, kann es zu andauerndem Betrieb des Kompressors und damit zu Reif- oder Eisbildung am Verdampfer kommen.
DEUTSCH 5.6 Hinweise zur Lagerung gefrorener Produkte So erzielen Sie die besten Ergebnisse mit Ihrem Gerät: • Vergewissern Sie sich, dass die gefrorenen Lebensmittel vom Händler angemessen gelagert wurden. • Achten Sie unbedingt darauf, die eingekauften gefrorenen Lebensmittel in der kürzest möglichen Zeit in das Gefriergerät zu bringen. 9 • Öffnen Sie die Tür nicht zu häufig, und lassen Sie die Tür nicht länger offen als notwendig.
www.aeg.com 6.2 Abtauen des Kühlschranks Bei normalem Betrieb wird Reif bei jedem Anhalten des Kompressors automatisch vom Verdampfer des Kühlschranks entfernt. Das Tauwasser sammelt sich in einer Auffangrinne und läuft durch eine Abflussöffnung in einen speziellen Behälter an der Rückseite des Geräts über dem Kompressor, wo es verdampft.
DEUTSCH 11 7. WAS TUN, WENN … WARNUNG! Ziehen Sie vor der Fehlersuche immer den Netzstecker aus der Steckdose. Die Fehlersuche, die in der vorliegenden Gebrauchsanweisung nicht beschrieben ist, darf nur von einem qualifizierten Elektriker oder einer kompetenten Person durchgeführt werden. Während das Gerät in Betrieb ist, entstehen bestimmte Geräusche (Kompressor und Kühlkreislauf).
www.aeg.com Störung Mögliche Ursache Abhilfe Wasser fließt an der Rückwand des Kühlschranks hinunter. Beim automatischen Abtauen fließt das abgetaute Wasser an der Rückwand des Kühlschranks hinunter. Das ist normal. Wasser fließt in den Innenraum des Kühlschranks. Der Wasserabflusskanal ist verstopft. Reinigen Sie den Ablauf. Die eingelagerten LeStellen Sie sicher, dass die bensmittel verhindern, Lebensmittel nicht die dass das Wasser zum Kol- Rückwand berühren. lektor fließt.
DEUTSCH 13 7.1 Ersetzen der Lampe 1. 2. 3. 4. 5. 6. 7. 8. 3. 7.2 Schließen der Tür 1. 2. Reinigen Sie die Türdichtungen. Stellen Sie die Tür nach Bedarf ein. Siehe hierzu „Montage“. Ziehen Sie den Netzstecker aus der Netzsteckdose. Lösen Sie die Schraube an der Lampenabdeckung. Nehmen Sie die Lampenabdeckung ab (siehe hierzu die Abbildung). Ersetzen Sie die defekte Lampe durch eine Lampe mit der gleichen Leistung, die speziell für Haushaltsgeräte vorgesehen ist.
www.aeg.com 9. MONTAGE WARNUNG! Lesen Sie bitte die "Sicherheitshinweise" sorgfältig vor der Aufstellung des Geräts durch, um Gefahren für Sie selbst zu vermeiden und einen korrekten Betrieb des Geräts zu gewährleisten. 9.
DEUTSCH 15 9.3 Standort 100 mm 15 mm 15 mm Das Gerät sollte in ausreichendem Abstand von Wärmequellen wie Heizungen, Boilern, direkter Sonneneinstrahlung, usw. aufgestellt werden. Vergewissern Sie sich, dass Luft an der Rückseite des Gehäuses frei zirkulieren kann. Wenn das Gerät unter einem Hängeschrank installiert wird, muss der Abstand zwischen der Geräteoberseite und dem Hängeschrank mindestens 100 mm betragen, um die bestmögliche Leistung zu garantieren.
www.aeg.com 9.5 Abnehmen der Arbeitsplatte 2 1 3 Zum Abbau der Arbeitsplatte sind folgende Schritte erforderlich: • Lösen Sie die linken und rechten Schrauben auf der Rückseite. • Schieben Sie die Arbeitsplatte nach hinten und heben Sie sie an. • Bewahren Sie die Schrauben zusammen mit der Arbeitsplatte an einem sicheren Ort auf. 9.6 Einbau und Montage unter einer durchgehenden Arbeitsplatte Wechseln Sie vor dem Aufstellen den Türanschlag bei Bedarf (siehe hierzu: Wechsel des Türanschlags).
DEUTSCH 17 9.7 Wechsel des Türanschlags Die nachfolgend beschriebenen Tätigkeiten müssen mit Hilfe einer zweiten Person durchgeführt werden, um ein Herunterfallen der Türen zu vermeiden. Beim Wechsel des Türanschlags muss wie folgt vorgegangen werden: • Ziehen Sie den Stecker aus der Steckdose. • Neigen Sie das Gerät vorsichtig nach hinten, so dass der Kompressor nicht den Boden berühren kann. • Schrauben Sie den linken Standfuß ab. • Lösen Sie die Schrauben des unteren Türscharniers.
www.aeg.com Bei niedrigen Umgebungstemperaturen (z.B. im Winter) kann es sein, dass die Türdichtung nicht richtig am Gerät anliegt. Warten Sie in diesem Fall auf die natürliche Anpassung der Dichtung. Wenden Sie sich bitte an den Kundendienst, falls Sie die oben beschriebenen Tätigkeiten nicht selbst durchführen möchten. Ein Kundendiensttechniker wird die Türen dann auf Ihre Kosten umbauen. 9.8 Wechsel des Gefrierfach-Türanschlags.
DEUTSCH 19 9.9 Steckdose VORSICHT! Vergewissern Sie sich, dass sich das Netzkabel des Geräts frei bewegen lässt. Die Steckdose für den Anschluss Ihres Geräts an die Stromversorgung sollte so gewählt werden, dass ein Herausziehen des Steckers jederzeit ungehindert möglich ist. Wird Ihr Gerät unter einer durchgehenden Arbeitsplatte aufgestellt, sollte die Steckdose wie abgebildet vorhanden sein. 9.
www.aeg.com SSSRRR! HISSS! BLUBB! SSSRRR! HISSS! BLUBB! CLICK! BRRR! CLICK! BRRR! CRACK! CRACK! 11. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte. Entsorgen Sie Geräte mit diesem Symbol nicht mit dem Hausmüll. Bringen Sie das Gerät zu Ihrer örtlichen Sammelstelle oder wenden Sie sich an Ihr Gemeindeamt.
DEUTSCH SENS-Sammelstellen findet sich unter www.sens.ch.
www.aeg.com SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FONCTIONNEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PREMIÈRE UTILISATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UTILISATION QUOTIDIENNE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FRANÇAIS 1. 23 INSTRUCTIONS DE SÉCURITÉ Pour votre sécurité et garantir une utilisation correcte de l'appareil, lisez attentivement cette notice, y compris les conseils et avertissements, avant d'installer et d'utiliser l'appareil pour la première fois. Pour éviter toute erreur ou accident, veillez à ce que toute personne qui utilise l'appareil connaisse bien son fonctionnement et ses fonctions de sécurité. Conservez cette notice avec l'appareil.
www.aeg.com Si le circuit frigorifique est endommagé : – évitez les flammes vives et toute autre source d'allumage – aérez soigneusement la pièce où se trouve l'appareil • Ne modifiez pas les spécifications de l'appareil. Si le câble d'alimentation est endommagé, il peut causer un court circuit, un incendie et/ou une électrocution.
FRANÇAIS • Déballez l'appareil et vérifiez qu'il n'est pas endommagé. Ne branchez pas l'appareil s'il est endommagé. Signalez immédiatement au revendeur de l'appareil les dommages constatés. Dans ce cas, gardez l'emballage. • Il est conseillé d'attendre au moins quatre heures avant de brancher l'appareil pour que le circuit frigorifique soit stabilisé. • Veillez à ce que l'air circule librement autour de l'appareil pour éviter qu'il ne surchauffe.
www.aeg.com Toutefois, le réglage doit être choisi en tenant compte du fait que la température à l'intérieur de l'appareil dépend de plusieurs facteurs : • la température ambiante • la fréquence d'ouverture de la porte • la quantité de denrées stockées • l'emplacement de l'appareil. Si le thermostat est réglé sur la position de froid maximum, lorsque la température ambiante est élevée et que l'appareil est plein, il est possible que le compresseur fonctionne en régime continu.
FRANÇAIS 4.3 Décongélation Avant utilisation, les aliments surgelés ou congelés peuvent être décongelés dans le compartiment du réfrigérateur ou à température ambiante en fonction 27 du temps disponible pour cette opération. Les petites portions peuvent même être cuites sans décongélation préalable (la cuisson sera cependant un peu plus longue). 4.
www.aeg.com re est sur la position de froid maximum et l'appareil est plein : il est possible que le compresseur fonctionne en régime continu, d'où un risque de formation excessive de givre sur l'évaporateur. Pour éviter ceci, modifiez la position du dispositif de réglage de température de façon à obtenir des périodes d'arrêt du compresseur et ainsi permettre un dégivrage automatique, d'où des économies d'énergie. 5.
FRANÇAIS • prévoyez un temps réduit au minimum pour le transport des denrées du magasin d'alimentation à votre domicile ; • évitez d'ouvrir trop souvent la porte du congélateur et ne la laissez ouverte que le temps nécessaire ; 29 • une fois décongelés, les aliments se détériorent rapidement et ne peuvent pas être recongelés ; • ne dépassez pas la durée de conservation indiquée par le fabricant. 6. ENTRETIEN ET NETTOYAGE ATTENTION débrancher l'appareil avant toute opération d'entretien.
www.aeg.com Dégivrez le congélateur lorsque l'épaisseur de la couche de givre est d'environ 3-5 mm. Pour enlever le givre, suivez les instructions ci-dessous : 1. Mettez l'appareil à l'arrêt. 2. Sortez les denrées congelées, enveloppez celles-ci dans plusieurs feuilles de papier journal et conservezles dans un endroit frais. 3. Laissez la porte ouverte. 4. Le dégivrage terminé, épongez et séchez bien l'intérieur, et remettez le bouchon. 5. Mettez l'appareil en fonctionnement. 6.
FRANÇAIS 31 Anomalie Cause possible L'appareil est bruyant L'appareil n'est pas stable Vérifiez la stabilité (les quatre pieds doivent être en contact avec le sol) L'appareil ne foncL'appareil est éteint. tionne pas. L'ampoule ne fonctionne pas. Remède Mettez l'appareil en fonctionnement. La fiche n'est pas correctement branchée à la prise de courant. Branchez correctement la fiche à la prise de courant. Le courant n'arrive pas à l'appareil. La prise de courant n'est pas alimentée.
www.aeg.com Anomalie Cause possible Remède De l'eau coule sur le sol. L'eau de dégivrage ne s'écoule pas dans le plateau d'évaporation situé au-dessus du compresseur. Fixez le tuyau de sortie de l'eau au plateau d'évaporation. La température à l'intérieur de l'appareil est trop basse. Le thermostat n'est pas bien réglé. Sélectionnez une température plus élevée. La température à l'intérieur de l'appareil est trop élevée. Le thermostat n'est pas bien réglé.
FRANÇAIS 33 7.1 Remplacement de l'ampoule d'éclairage 1. 2. 3. 4. 5. 6. 7. 8. 7.2 Fermeture de la porte 1. 2. Nettoyez les joints de la porte. Si nécessaire, ajustez la porte. Reportez-vous au chapitre « Installation ». 3. Débranchez l'appareil de la prise secteur. Retirez la vis du diffuseur. Retirez le diffuseur (voir l'illustration). Remplacez l'ampoule défectueuse par une ampoule neuve de puissance identique, spécifiquement conçue pour les appareils électroménagers.
www.aeg.com 9. INSTALLATION AVERTISSEMENT Pour votre sécurité et le bon fonctionnement de l'appareil, veuillez lire attentivement les "Consignes de sécurité" avant d'installer l'appareil. prévu. Au delà de ces températures, ses performances peuvent s'en trouver diminuées. Classe Température ambiante climatique 9.
FRANÇAIS 35 9.3 Emplacement 100 mm 15 mm 15 mm L'appareil doit être installé à bonne distance des sources de chaleur telles que les radiateurs, les chaudières, les rayons directs du soleil, etc. Assurez-vous que l'air circule librement à l'arrière de l'appareil. Pour assurer des performances optimales, si l'appareil est placé sous un meuble en surplomb, la distance minimale entre le haut de l'appareil et ce meuble doit être d'au moins 100 mm.
www.aeg.com 9.5 Retrait du plan de travail de l'appareil 2 Pour retirer le plan de travail, procédez comme suit : • Dévissez les vis gauche et droite à l'arrière. • Poussez le plan de travail vers l'arrière, puis soulevez-le. • Conservez les vis dans un endroit sûr, avec le plan de travail. 1 3 9.6 Installation et fixation à un plan de travail continu Avant le montage, modifiez le sens d'ouverture de la porte au besoin (consultez la section Réversibilité de la porte).
FRANÇAIS 37 9.7 Réversibilité de la porte Pour effectuer les opérations suivantes, il est conseillé de se faire aider par une autre personne pour maintenir fermement les portes lors de toute manipulation de l'appareil. Pour changer le sens d'ouverture de la porte, procédez comme suit : • Débranchez la fiche de la prise électrique. • Inclinez l'appareil avec précaution vers l'arrière pour que le compresseur ne touche pas le sol. • Dévissez le pied gauche.
www.aeg.com Si la température ambiante est basse (par exemple, en hiver), il se peut que le joint n'adhère pas parfaitement. Dans ce cas, attendez que le joint reprenne sa taille naturelle. Si vous ne souhaitez pas effectuer personnellement les opérations décrites cidessus, contactez votre service aprèsvente. Un technicien du service aprèsvente procédera à la réversibilité des portes à vos frais. 9.
FRANÇAIS 39 9.9 Prise de courant ATTENTION Assurez-vous que le câble d'alimentation n'est pas coincé. La prise de courant nécessaire pour le branchement de votre appareil à l'alimentation électrique doit être positionnée de sorte qu'il est possible de retirer la fiche de l'appareil. Si votre appareil est installé sous un plan de travail continu, la prise de courant doit être disponible comme indiqué. 9.
www.aeg.com SSSRRR! HISSS! BLUBB! SSSRRR! HISSS! BLUBB! CLICK! BRRR! CRACK! CLICK! BRRR! CRACK! 11. EN MATIÈRE DE PROTECTION DE L'ENVIRONNEMENT Recyclez les matériaux portant le symbole . Déposez les emballages dans les conteneurs prévus à cet effet. Contribuez à la protection de l'environnement et à votre sécurité, recyclez vos produits électriques et électroniques. Ne jetez pas les appareils portant le symbole avec les ordures ménagères.
FRANÇAIS collecte officiels SENS est disponible sous www.sens.ch.
www.aeg.com INDICE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. ISTRUZIONI DI SICUREZZA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USO DELL'APPARECCHIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRIMO UTILIZZO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UTILIZZO QUOTIDIANO . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ITALIANO 1. 43 ISTRUZIONI DI SICUREZZA Per garantire un impiego corretto e sicuro dell'apparecchio, prima dell'installazione e del primo utilizzo leggere con attenzione il libretto istruzioni, inclusi i suggerimenti e le avvertenze. Per evitare errori e incidenti, è importante garantire che tutte le persone che utilizzano l'apparecchio ne conoscano il funzionamento e le caratteristiche di sicurezza.
www.aeg.com AVVERTENZA! Tutti i componenti elettrici (cavo di alimentazione, spina, compressore) devono essere sostituiti da un tecnico certificato o da personale d'assistenza qualificato al fine di evitare di correre rischi. 1. • • • • Non collegare prolunghe al cavo di alimentazione. 2. Evitare che il lato posteriore dell'apparecchiatura possa schiacciare o danneggiare la spina, causandone il surriscaldamento con un conseguente rischio di incendio. 3.
ITALIANO • Attorno all'apparecchio vi deve essere un'adeguata circolazione dell'aria, altrimenti si può surriscaldare. Per ottenere una ventilazione sufficiente seguire le istruzioni di installazione. • Se possibile il retro dell'apparecchio dovrebbe essere posizionato contro una parete per evitare di toccare le parti calde o di rimanervi impigliati (compressore, condensatore), evitando così possibili scottature. • L'apparecchio non deve essere posto vicino a radiatori o piani di cottura a gas.
www.aeg.com 3. PRIMO UTILIZZO 3.1 Pulizia dell'interno Prima di utilizzare l'apparecchio per la prima volta, lavare l'interno e gli accessori interni con acqua tiepida e un po' di sapone neutro in modo a togliere il tipi- co odore dei prodotti nuovi, quindi asciugare accuratamente. Non usare detergenti corrosivi o polveri abrasive che danneggiano le finiture. 4. UTILIZZO QUOTIDIANO 4.
ITALIANO 47 4.5 Posizionamento dei ripiani della porta Per facilitare l'introduzione di alimenti di diverse dimensioni, i ripiani della porta possono essere posizionati ad altezze differenti. Per regolare l'altezza dei ripiani, procedere come segue: tirare delicatamente il ripiano nella direzione indicata dalle frecce fino a sganciarlo, quindi riposizionarlo dove necessario. 5. CONSIGLI E SUGGERIMENTI UTILI 5.
www.aeg.com Frutta e verdura: dovrebbero essere pulite accuratamente e collocate nell'apposito/i cassetto/i speciale/i. Burro e formaggio: dovrebbero essere posti in contenitori ermetici speciali o avvolti in pellicole di alluminio o sacchetti di politene per escludere per quanto possibile l'aria. Bottiglie di latte: dovrebbero essere tappate e conservate nell'apposito ripiano sulla porta. Non conservare nel frigorifero banane, patate, cipolle o aglio se non sono confezionati.
ITALIANO Non tirare, spostare o danneggiare tubi e/o cavi all'interno dell'apparecchio. Non usare mai detergenti, polveri abrasive, prodotti per la pulizia con una forte profumazione o cere lucidanti per pulire l'interno, in quanto danneggiano la superficie e lasciano un odore forte. Pulire il condensatore (griglia nera) e il compressore sul retro dell'apparecchio con una spazzola. Questa operazione migliorerà le prestazioni dell'apparecchiatura riducendone i consumi di energia.
www.aeg.com 3. Sbrinare e pulire l'apparecchiatura e tutti gli accessori 4. Lasciare le porte aperte per evitare la formazione di odori sgradevoli. Se l'apparecchiatura rimane accesa, farla controllare periodicamente per evitare che gli alimenti si deteriorino in caso di interruzione della corrente elettrica. 7. COSA FARE SE… AVVERTENZA! Prima della ricerca guasti, estrarre la spina dalla presa.
ITALIANO Problema Scorre acqua sul pannello posteriore del frigorifero. 51 Possibile causa Soluzione La temperatura degli alimenti è troppo alta. Prima di introdurre gli alimenti, lasciarli raffreddare a temperatura ambiente. La temperatura ambiente è troppo alta. Abbassare la temperatura ambiente. Durante lo sbrinamento automatico, la brina che si forma sul pannello posteriore si scioglie. Non si tratta di un'anomalia. Scorre acqua all'inLo scarico dell'acqua è terno del frigorifero. ostruito.
www.aeg.com Problema Possibile causa Soluzione La porta non è chiusa cor- Vedere "Chiusura della rettamente. porta". La temperatura non è regolata correttamente. Impostare una temperatura superiore. 7.1 Sostituzione della lampadina 1. 2. 3. 4. 5. 6. 7. 8. 7.2 Chiusura della porta 1. 2. Pulire le guarnizioni della porta. Se necessario, regolare la porta. Vedere "Installazione". 3. Scollegare la spina dalla presa di corrente. Rimuovere la vite dal coprilampada.
ITALIANO 53 9. INSTALLAZIONE AVVERTENZA! Leggere con attenzione le "Informazioni per la sicurezza" per la vostra sicurezza e per il corretto funzionamento dell'apparecchio prima di procedere all'installazione. 9.
www.aeg.com 9.3 Posizione 100 mm 15 mm 15 mm L'apparecchiatura deve essere installata lontano da fonti di calore come per esempio termosifoni, boiler, luce solare diretta, ecc.. Verificare che sul lato posteriore sia garantita un'adeguata circolazione dell'aria. Per ottenere prestazioni ottimali, se l'apparecchiatura è installata sotto un pensile, si raccomanda di mantenere una distanza minima di 100 mm tra quest'ultimo e lo spigolo superiore dell'apparecchiatura.
ITALIANO 55 9.5 Rimozione del piano di lavoro 2 Per rimuovere il piano di lavoro, procedere come indicato di seguito: • Svitare la vite sinistra e destra sulla parte posteriore. • Spingere indietro il piano di lavoro e sollevarlo. • Conservare le viti in un luogo sicuro insieme al piano di lavoro. 1 3 9.
www.aeg.com 9.7 Reversibilità della porta Per effettuare le seguenti operazioni, si raccomanda di farsi aiutare da un'altra persona che tenga ben ferme le porte dell'apparecchiatura. Per modificare il senso di apertura della porta, procedere come segue: • Estrarre la spina dalla presa di alimentazione. • Inclinare l'apparecchiatura verso la parte posteriore facendo in modo che il compressore non tocchi il pavimento. • Svitare il piedino sinistro. • Rimuovere le viti dalla cerniera inferiore della porta.
ITALIANO Se la temperatura ambiente è bassa (ad esempio in inverno), è possibile che la guarnizione non aderisca perfettamente all'apparecchiatura. In tal caso, attendere che aderisca naturalmente. Per chi preferisce non eseguire direttamente le operazioni sopra descritte, consigliamo di rivolgersi al servizio assistenza più vicino. L'intervento di inversione delle porte, eseguito dai tecnici del servizio post-vendita, sarà a carico dell'utente. 9.
www.aeg.com 9.9 Presa a muro ATTENZIONE Accertarsi che il cavo di rete sia libero da ostacoli. La posizione della presa a muro, necessaria per collegare l'apparecchiatura alla rete di alimentazione, deve essere tale da permettere di sfilare la spina di alimentazione dell'apparecchiatura. Se l'apparecchiatura è installata sotto un piano di lavoro continuo, la posizione della presa dovrebbe essere quella indicata di seguito. 9.
ITALIANO SSSRRR! HISSS! BLUBB! CLICK! SSSRRR! BRRR! HISSS! CRACK! BLUBB! CLICK! BRRR! CRACK! 11. CONSIDERAZIONI AMBIENTALI Riciclare i materiali con il simbolo . Buttare l'imballaggio negli appositi contenitori per il riciclaggio. Aiutare a proteggere l’ambiente e la salute umana e a riciclare rifiuti derivanti da apparecchiature elettriche ed elettroniche. Non smaltire le apparecchiature che riportano il simbolo insieme ai normali rifiuti domestici.
www.aeg.com lista dei centri di raccolta ufficiali della SENS è visibile nel sito www.sens.ch.
ENGLISH 61 CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DAILY USE . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. SAFETY INSTRUCTIONS In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
ENGLISH WARNING! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel to avoid hazard. 1. • • • • Power cord must not be lengthened. 2. Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable. 5.
www.aeg.com • The appliance must not be located close to radiators or cookers. • Make sure that the mains plug is accessible after the installation of the appliance. • Connect to potable water supply only (If a water connection is foreseen). 1.6 Service • Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person. • This product must be serviced by an authorized Service Centre, and only genuine spare parts must be used.
ENGLISH 65 3. FIRST USE 3.1 Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish. 4. DAILY USE 4.1 Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time.
www.aeg.com 4.5 Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at different heights. To make these adjustments proceed as follows: gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required. 5. HELPFUL HINTS AND TIPS 5.1 Normal Operating Sounds • You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped through the coils or tubing. This is correct.
ENGLISH wrapped in aluminium foil or polythene bags to exclude as much air as possible. Milk bottles: these should have a cap and should be stored in the bottle rack on the door. Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator. 5.5 Hints for freezing To help you make the most of the freezing process, here are some important hints: • the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating plate; • the freezing process takes 24 hours.
www.aeg.com the performance of the appliance and save electricity consumption. Take care of not to damage the cooling system. Many proprietary kitchen surface cleaners contain chemicals that can attack/ damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little washing-up liquid added. After cleaning, reconnect the equipment to the mains supply. 6.
ENGLISH 69 7. WHAT TO DO IF… WARNING! Before troubleshooting, disconnect the mains plug from the mains socket. Only a qualified electrician or competent person must do the troubleshooting that is not in this manual. There are some sounds during normal use (compressor, refrigerant circulation). Problem Possible cause Solution The appliance is noisy The appliance is not supported properly Check if the appliance stands stable (all the four feet should be on the floor) The appliance does not operate.
www.aeg.com Problem Possible cause Solution Water flows into the refrigerator. The water outlet is clogged. Clean the water outlet. Products prevent that wa- Make sure that products ter flows into the water do not touch the rear collector. plate. Water flows on the ground. The melting water outlet Attach the melting water does not flow in the evap- outlet to the evaporative orative tray above the tray. compressor. The temperature in the appliance is too low.
ENGLISH 71 7.1 Replacing the lamp 1. 2. 3. 4. 5. 6. 7. 8. 3. 7.2 Closing the door 1. 2. Clean the door gaskets. If necessary, adjust the door. Refer to "Installation". Disconnect the mains plug from the mains socket. Remove the screw from the lamp cover. Remove the lamp cover (refer to the illustration). Replace the used lamp with a new lamp of the same power and specifically designed for household appliances. (the maximum power is shown on the lamp cover). Install the lamp cover.
www.aeg.com 9. INSTALLATION WARNING! Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance. the climate class indicated on the rating plate of the appliance: Climate class Ambient temperature 9.
ENGLISH 73 9.3 Location 100 mm 15 mm 15 mm The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet.To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, however, the appliance should not be positioned below overhanging wall units.
www.aeg.com 9.5 Detaching the worktop 2 To remove the worktop, please proceed as follows: • Unscrew the left and the right screws at the back. • Push the worktop backwards and lift it up. • Store the screws in a safe place together with the worktop. 1 3 9.6 Fitting and mounting to continuous worktop Before fitting, change the door opening direction if necessary (see: Door reversibility). • Push the appliance carefully into the niche. • Take care that the mains cable is not jammed in.
ENGLISH 75 9.7 Door reversibility To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations. To change the opening direction of the door, do these steps: • Remove the plug from the power socket. • Tilt back the appliance carefully so that the compressor cannot touch the floor. • Unscrew the left foot. • Unscrew the screws of the door bottom hinge.
www.aeg.com If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket. In case you do not want to carry out the above mentioned operations, contact the nearest After Sales Service Force. The After Sales Service specialist will carry out the reversibility of the doors at your cost. 9.
ENGLISH 77 9.9 Plug socket CAUTION! Make sure that the mains cable can move freely. The plug socket necessary for connection of your appliance to the electricity supply should be positioned so that it is possible to pull out the appliance plug. If your appliance is installed under a continuous worktop, the plug socket should be provided as shown. 9.10 Electrical connection Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.
www.aeg.com SSSRRR! HISSS! BLUBB! SSSRRR! HISSS! BLUBB! CLICK! BRRR! CRACK! CLICK! BRRR! CRACK! 11. ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
ENGLISH 79
212000094-B-512012 www.aeg.