User manual

10
www.aeg.com
carried out under the supervision of
the person competent in the use of
ammable refrigerants.
• The working temperature range of the
air conditioner is 16-35
o
C (60-95
o
F)
under cooling mode; 5-27
o
C (41-80
o
F)
under heating mode.
2.2 Warning during usage
To prevent injury to the user or other
people and property damage, the
following instructions must be followed.
Incorrect operation due to ignoring
instructions may cause harm or damage.
The seriousness is classied by the
following indications:
This symbol indicates the possibility
of death or serious injury.
Warning during usage
This symbol indicates the
possibility of injury or damage
to property.
WARNING!
WARNING!
CAUTION!
Meanings of symbols used in this manual
are shown below:
This symbol indicates never
to do this.
This symbol indicates always
do this.
competence to handle refrigerants
safely in accordance with an industry
recognised assessment specication.
• Servicing shall only be performed
as recommended by the equipment
manufacturer. Maintenance and
repair requiring the assistance of
other skilled personnel shall be
Warning Meaning
Plug in power plug properly Otherwise, it may cause electric shock,
re and explosion due to excess heat
generation
Do not operate or stop the unit by inserting
or pulling out Die power plug
It may cause electric shock, re and
explosion due to heat generation
Do not damage or use an unspecied power
cord
It may cause electric shock, re and
explosion. If the power cord is damaged,
it must be replaced by the manufacturer
or an authorised service centre or a
similarly qualied person in order to
avoid a hazard
Do not modify power cord length or share
the outlet with other appliances
It may cause electric shock, re and
explosion due to heat generation
Do not operate with wet hands or in damp
environment
It may cause electric shock
Do not direct airow at room occupants This could harm your health
Always ensure eective earthing Incorrect earthing may cause electric
shock
Do not allow water to run into electric parts It may cause failure of unit or electric shock
Always install circuit breaker and a
dedicated power circuit
Incorrect installation may cause electric
shock, re and explosion
Unplug the unit if strange sounds, smell,
or smoke comes from it
It may cause electric shock, re and
explosion
Do not use the socket if it is loose or
damaged
It may cause electric shock, re and
explosion