User manual

17ENGLISH
TURNING THE UNIT ON
How to Use the Remote Control
Plug in the unit, then press the “on/off”
button (when turned on, the unit will
operate as the last setting before
shutdown.
To switch the unit off, press “on/off”
button again, then remove the plug.
Always switch the unit off by pressing the
“on/off” button and wait for few minutes
before removing the plug.
Press the “mode” button until the left side
of LCD screen displays “cool”.
Press the “fan speed” button to choose
the fan speed “auto”, “high”, “mid”, and “low”.
Press the “ ” and “ ” button to choose
the temperature you want.
Press the “mode” button until the left side
of LCD screen displays “dry”.
At the same time, the “low” fan symbol
appears on the screen.
Note: In this mode, fan speed cannot
be selected.
Press the “mode” button until the left side
of LCD screen displays “fan”.
In this mode, you can select fan speed
Cool mode
Dry mode
Fan mode
Press the “mode” button until the left side
of LCD screen displays “heat”.
Press the “fan speed” button to choose
the fan speed “auto”, “high”, “mid”, and “low”.
Press the “ ” and “ ” button to choose
the temperature you want.
Press the “mode” button until the upper
side of LCD screen displays “auto”.
Under AUTO mode, you can not select
the fan speed.
Press the “ ” and “ ” button to choose
the temperature you want.
When the unit is in Cool, Heat or auto
mode, you can press the “sleep” button
to make the unit run in Sleep mode. In
this mode, the fan speed will be set as
“auto” automatically, which cannot be
changed.
In Cool/Heat mode the selected
temperature will increase/decrease
by 1°C 30 minutes after the mode is
selected. The temperature will then
increase/decrease by another 1°C
Heat mode (For Heat & Cool models only)
AUTO mode
Sleep mode
“high”, “mid” or “low” by pressing the
Fan speed button and referring to the
diagram.
Note: In this mode, the air exhaust hose
does not need to be connected.