User manual

Operating Instructions
15
Prior to Using for the First Time
Setting/Changing the Time
Following the connection of mains power, the TIME function indicator
and the temperature/time display flash.
You must then first set the time. The time can set with the appliance
either switched on or off.
3
If the time has not been set, the oven cannot be switched on.
Setting the Time
0 1. Press the + or - button and set the required time.
Each time the + button is pressed the time advances one minute, and
each time the - button is pressed, the time is set back by one minute.
2. Press the clock W button or wait for approx. 5 seconds.
The time in the temperature/time display changes from flashing to con-
tinuous display. The time is thus set.
3
If the + or - button is held pressed for more than 2 seconds, the min-
utes start to run forwards or backwards until the button is released. In
this way you can reach the required value more rapidly.
3
If the appliance has been isolated from the mains, e.g. due to a fuse
being switched off, the temperature/time display starts flashing again.
In this case, set the time again as described.