Operation Manual

33Using the Oven
Information about the clock functions
• After a clock function has been selected, the corresponding symbol flashes for
about 5 seconds. During this time, the desired times can be set or modified using the
or button.
• When the desired time has been set, the corresponding symbol continues to flash for
approx. 5 seconds. After this the symbol lights up. The set time begins to run.
2 Using residual heat with the DURATION and END clock functions
When the DURATION and END clock functions are used, the oven switches the
heating elements off, when 90% of the time set or calculated has elapsed. The residual
heat present is used to continue the cooking process until the time set has elapsed
(3 to 20 mins.).
3 The clock functions display shows the period of operation for the selected oven
function, if none of the clock functions MINUTE MINDER , DURATION or END
is set.