Operation Manual

English

Use

You have two ways to use the device: By cable or cordless via Bluetooth.

By cable

1. Connectthe3.5mmstereoRCAcabletoanexternalaudiosource.Ifrequired,usea

suitable adapter (not included).

2. Open the rubber cover on the bottom.

3. Insert the other end of the cable into the AUX jack (5) on the unit.

4. Switch the speaker on by setting the ON/OFF switch (3) to “ON”.

5. Adjust the volume using the volume control (2). The function buttons on the speaker

are not operational.

NOTE:

Ifpossible,adjustthevolumeoftheexternalaudiodevicetoapropersetting.

Cordless via Bluetooth

NOTE:

Bluetooth connection is not available if there is an audio cable connected to the AUX

jack (5).

Bluetooth involves a technology for wireless radio connection of devices over a short dis-

tance. Devices with Bluetooth standard are transmitting between 2,402 and 2,480 GHz in

the ISM band (Industrial, Scientiﬁc and Medical). Interferences can however be caused by

WLANs,networks,wirelesstelephones,ormicrowaveovens,forexample,whichoperatein

the same frequency band.

This device offers you the possibility to use a Bluetooth-enabled device. The functional

radiusislimitedtoapprox.15metresdependingonthesurroundingsandtheunitused.

If your playing device supports the A2DP proﬁle (Advanced Audio Distribution Proﬁle) and

has a music-player function, then you can also wirelessly transfer music to the device. The

A2DP proﬁle involves a multi-vendor Bluetooth proﬁle. By streaming, stereo-audio signals

are wirelessly transferred between the playing device (source) and the receiving device. To

be able to operate the source by remote control, the player needs to support the AVRCP

proﬁle (Audio Video Remote Control Proﬁle).

Due to the different device manufacturers, models, and software versions, a full functional-

ity cannot be guaranteed.