Operation Manual

English

• Logging on devices (Pairing)

Before you listen to music via the unit, you must pair the devices.

1. Ensure, that the Bluetooth function is activated in your player (e.g. mobile phone).

For this, refer to the operation manual of your player.

2. Turn the device on by moving the ON/OFF switch (3) to the ON position. The indi-

catorlampashesrapidly.Thespeakertriestoconnecttoadevicethathasbeen

paired already. If the speaker cannot detect a known device within 30 seconds, a

beepwillsoundandtheindicatorlightwillashslowly.Thedeviceisnowsettothe

pairing mode.

3. Choose the Bluetooth menu in your player and register the device in your player.

For this, refer to the operation manual of your player. The device “AEG BSS 4827”

will show in your player as a selection.

4. Now enter the password “0000” in your player, depending on the device manufac-

turers, model, and software version.

Oncepairinghasbeensuccessful,abeepwillsoundandtheindicatorlightwillbrieyash

rapidlyandthenstartashingslowly(2xapprox.every5seconds).

NOTE:

• Dependingonthedevicemanufacturer,youneedtoperformtheregistration(PAIR-

ING) again to connect the devices.

• Inthecaseofproblemswiththepairingofaplaybackdevice,deactivatetheWiFi-/

and mobile data function in your playback device.

• TheBluetoothcompatibilitycannotbeensuredfordevices(e.g.mobilephones)get-

ting released in the future.

• Toensureanoptimalconnection,makesurethatthebatteryofyourplayeriscom-

pletely charged.

• Someofthemobilephonebrandshaveanenergy-savingmode.Deactivatethe

energy-saving mode as it can otherwise result in problems during the data transfer

through Bluetooth.

• Tobeabletotransferaudiodata,Bluetoothneedstostayactivatedinyourplayer.

Observe the operation manual of your player.

• Ifamobilephoneonwhichyouareplayingmusicreceivesacall,themusicwillbe

interrupted.Abeepwillsoundapprox.every3seconds.Press

button (8) to

answer the call. The speakers will output the sound. Speak into the microphone on

the device or transfer the call to your mobile phone. Follow the display message on

your mobile phone when doing so. When having ﬁnished the call, both devices will

reconnect again. If necessary, start playback manually.