User manual

10. CARE AND CLEANING
WARNING!
Refer to the Safety chapters.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and a
cleaning agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the appliance interior after each
use. Then you can remove dirt more
easily and it does not burn on.
• Clean stubborn dirt with a special
oven cleaner.
• Clean all accessories after each use
and let them dry. Use a soft cloth with
warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can cause damage to the
nonstick coating.
10.1 Catalytic walls
The walls with a catalytic coating are
self-cleaning. They absorb fat which col-
lects on the walls while the appliance
operates.
To support the self-cleaning process,
heat the oven without any food
regularly:
1.
Turn the oven light on.
2.
Remove the accessories from the
oven.
3.
Clean the oven floor with warm wa-
ter and washing up liquid, then dry
it.
4.
Set the function.
5.
Set the oven temperature to 250 °C
and let oven operate for 1 hour.
6.
Clean the oven cavity with a soft and
damp sponge.
WARNING!
Do not clean the catalytic surface
with any cleaning agents. This
will damage the catalytic surface.
The discolouration of the catalyt-
ic surface has no effect on the
catalytic properties.
10.2 Shelf supports
Removing the shelf supports
You can remove the shelf supports to
clean the side walls.
1.
Pull the front of the shelf support
away from the side wall.
ENGLISH 23