User manual

4. Press to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day flashes in the display.
6.3 Setting the DURATION
1. Set an oven function.
2. Press
again and again until
starts to flash.
3. Press or to set the minutes and
the hours for DURATION time.
4. Press
to confirm.
When the time ends an acoustic signal
sounds for 2 minutes.
and time
setting flash in the display. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
6.4 Setting the END
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press
or to set the hours and
the minutes for END time.
4. Press to confirm.
At the set time an acoustic signal sounds
for 2 minutes.
and time setting flash
in the display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
6.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or to set the minutes and
the hours for DURATION time.
4. Press to confirm. The display
shows flashing .
5. Press or to set the hours and
the minutes for END time.
6. Press to confirm.
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
time an acoustic signal sounds for 2
minutes. and time setting flash in the
display. The appliance deactivates.
7. Press any button to stop the acoustic
signal.
8. Turn the knob for the oven functions
to the off position.
6.6 Setting the MINUTE
MINDER
1.
Press
again and again until and
"00" flash in the display.
2. Press or to set the MINUTE
MINDER.
First you set the seconds, then the
minutes.
When the time you set is longer than
60 minutes, flash in the display.
3. Set the hours.
4. The MINUTE MINDER starts
automatically after 5 seconds.
After 90% of the set time, an acoustic
signal sounds.
5. When the set time ends, an acoustic
signal sounds for 2 minutes. "00:00"
and
flash in the display. Press any
button to stop the acoustic signal.
6.7 COUNT UP TIMER
To reset the Count Up Timer, press and
hold and . The timer starts to count
up again.
www.aeg.com
10