User manual

10.4 Catalysis
CAUTION!
Do not clean the catalytic
surface with oven sprays,
abrasive cleaning agents,
soap or other cleaning
agents. This will damage the
catalytic surface.
Clean the inner glass of the oven door
with warm water and a soft cloth.
Remove all accessories.
The walls and the top of the cavity are
coated with catalytic enamel. It gathers
fat and dirt which burns off at high
temperatures without leaving a smell.
To support this self-cleaning process
heat the empty appliance regularly.
Spots or discolouration of
the catalytic surface have no
effect on its catalytic
properties.
1.
Set the Catalysis function. Refer to
"Oven functions".
The display shows CATA and the
duration of the cleaning procedure (1
hour). You cannot change the duration,
but you can use the End function to
delay the start of the cleaning procedure.
An acoustic signal sounds after the time
ends. The appliance deactivates.
2. Push a button to stop the acoustic
signal.
3. Clean the bottom of the appliance
with a damp soft sponge.
To stop Catalysis before it finishes, turn
the knob for the oven functions to the off
position.
10.5 Cleaning reminder
As a reminder that catalytic cleaning is
necessary, CATA flashes in the display
for 10 seconds after each activation and
deactivation of the appliance.
The cleaning reminder
goes out:
• after the end of the
Catalysis function.
• if you press and at
the same time.
10.6 Catalytic fan cover
CAUTION!
Do not clean the catalytic
surface with oven sprays,
abrasive cleaning agents,
soap or other cleaning
agents. This will damage the
catalytic surface.
Spots or discolouration of
the catalytic surface have no
effect on catalytic
properties.
WARNING!
Keep children away when
you clean the oven at a high
temperature. The oven
surface becomes very hot
and there is a risk of burns.
Before activating the
catalytic cleaning remove all
the accessories from the
oven.
Turn the oven light on.
The fan cover with a catalytic coating is
self-cleaning. It absorbs fat which collects
on the walls while the appliance
operates.
To support the self-cleaning procedure,
heat the empty oven on a regular basis.
1. Clean the oven floor with warm water
and washing up liquid, then dry it.
2. Set the function .
3. Set the oven temperature to 250 °C
and let the oven operate for 1 hour.
4. When the appliance is cool, clean it
with a soft and moist sponge.
10.7 Oven ceiling
WARNING!
Deactivate the appliance
before you remove the
heating element. Make sure
that the appliance is cold.
There is a risk of burns.
Remove the shelf supports.
ENGLISH
33