Manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. PRODUCT DESCRIPTION
- 4. CONTROL PANEL
- 5. BEFORE FIRST USE
- 6. DAILY USE
- 7. CLOCK FUNCTIONS
- 8. AUTOMATIC PROGRAMMES
- 9. USING THE ACCESSORIES
- 10. ADDITIONAL FUNCTIONS
- 11. HINTS AND TIPS
- 11.1 Inner side of the door
- 11.2 Advice for special heating functions of the oven
- 11.3 Baking
- 11.4 Tips on baking
- 11.5 Baking on one level:
- 11.6 Bakes and gratins
- 11.7 Moist Fan Baking
- 11.8 Multilevel Baking
- 11.9 Slow Cooking
- 11.10 Pizza Setting
- 11.11 Roasting
- 11.12 Roasting tables
- 11.13 Grilling
- 11.14 Frozen foods
- 11.15 Defrost
- 11.16 Preserving
- 11.17 Drying
- 11.18 Bread Baking
- 11.19 Core temperature sensor table
- 12. CARE AND CLEANING
- 13. TROUBLESHOOTING
![](/manual/aeg/be3003021w/manual-english/images/img-16.png)
7. When the time ends, an acoustic
signal sounds. Press a sensor field to
deactivate the signal.
With some programmes turn
over the food after 30
minutes. The display shows a
reminder.
9. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
9.1 Core temperature sensor
There are two temperatures to be set:
the oven temperature and the core
temperature.
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
CAUTION!
Only use the core
temperature sensor supplied
or the correct replacement
parts.
The core temperature sensor
must stay in the meat and in
the socket during the cooking.
1. Activate the appliance.
2. Put the tip of the core temperature
sensor into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows the core temperature
sensor symbol.
4. Press
or in less than 5
seconds to set the core temperature.
5. Set the heating function and, if
necessary, the oven temperature.
The appliance calculates an approximate
end time. The end time is different for
the different quantities of the food, the
set oven temperatures (minimum 120 °C)
and the operating modes. The appliance
calculates the end time in approximately
30 minutes.
6. To change the core temperature,
press
.
When the meat is at the set core
temperature, an acoustic signal sounds.
The appliance deactivates automatically.
7. Touch a sensor field to stop the
signal.
8. Remove the core temperature sensor
plug from the socket and remove the
meat from the oven.
WARNING!
The core temperature sensor
is hot. There is a risk of burns.
Be careful when you remove
the tip and the plug of the
core temperature sensor.
9.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
www.aeg.com
16