User manual

Problem Possible cause Remedy

The lamp does not oper-

ate.

The lamp is defective. Replace the lamp.

The display shows an er-

ror code that is not on

this list.

There is an electrical

fault.

• Deactivate the appli-

ance with the house

fuse or the safety

switch in the fuse box

and activate it again.

• If the display shows

the error code again,

contact the Customer

Care Department.

If you cannot find a solution to the prob-

lem yourself, contact your dealer or the

service centre.

The necessary data for the service centre

is on the rating plate. The rating plate is

on the front frame of the appliance cavi-

ty.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

12. INSTALLATION

WARNING!

Refer to the Safety chapters.

The built-in unit must meet the

stability requirements of DIN

68930.

min.

3 mm