User manual

Every time you put the core temperature sensor in the socket, you need to set the duration
and end time again.
When the appliance calculates the provisional duration time for the first time, the Timer/
Residual heat display shows "-" that changes position. When the first calculation ends, the
Timer/Residual heat display shows the duration of the cooking process. Calculations are
running in the background during the cooking process. Display is updated from time to
time with new duration value.
When you put the core temperature sensor plug into the socket, the display shows
current core temperature. You can change the temperature at any time. Press the
temperature
button and use +/- shuttle to change the temperature:
• press once - the display shows set core temperature which changes after every 10 sec-
onds to current core temperature;
• press twice - the display shows current oven temperature which changes after every 10
seconds to set oven temperature;
• press three times - the display shows oven set temperature.
Installing the Oven Accessories
The deep pan and the wire shelf have side edges.
These edges and the shape of the guide-bars cau-
ses the anti-tilt safety for the oven accessories.
Installing the wire shelf and the deep pan to-
gether
Put the wire shelf on the deep pan. Push the deep
pan between the guide-bars of one of the oven
levels.
Trivet and grill/roasting pan
WARNING!
Risk of burns when removing the accessories from a hot oven.
14 Using the Accesories